Products / Adhesive/Sealant Dispensing

Single-Component Metering / Dispense Valve (DispensIt)

Direct answer

LibertyCES has documented Single-Component Metering / Dispense Valve (DispensIt) in Electronics Manufacturing. Documented models include Graco DispensIt 1052, 1053 and 1092. Send James the fluid, concentration, temperature and flow for a free spec review.

30+ years spec experience. Send James the process data and get a real answer — not a catalog page.

Request a Spec Review →

1 sector application

Where LibertyCES specs Single-Component Metering / Dispense Valve (DispensIt)

Electronics Manufacturing

Limited documentation

Graco DispensIt 1052 (pneumatic, micrometer adjustable, dot/metered) · 1053 (servo, programmable shot/bead, dot/continuous bead/metered) · 1092 (pneumatic, micrometer stroke, viscosity-insensitive) · 1093 (servo, viscosity-insensitive, continuous bead) · 1206 (manual/mechanical, calibrated stroke, positive material shutoff)

Related Guides

Technical guides for Single-Component Metering / Dispense Valve (DispensIt)

Industrial Actuation & Severe Service Valves →Sodium Hypochlorite Valve Material Selection Guide →

FAQ

Frequently Asked Questions

What industries use Single-Component Metering / Dispense Valve (DispensIt)?

LibertyCES has documented Single-Component Metering / Dispense Valve (DispensIt) specified across 1 sector application, including Electronics Manufacturing.

How is Single-Component Metering / Dispense Valve (DispensIt) used in Electronics Manufacturing?

Single-Component Metering / Dispense Valve (DispensIt) is specified for Electronics Manufacturing applications — examples include Graco DispensIt 1052 (pneumatic, micrometer adjustable, dot/metered), 1053 (servo, programmable shot/bead, dot/continuous bead/metered), 1092 (pneumatic, micrometer stroke, viscosity-insensitive), 1093 (servo, viscosity-insensitive, continuous bead), 1206 (manual/mechanical, calibrated stroke, positive material shutoff). This is lightly documented in LibertyCES's field data.

Spec Review

Send LibertyCES the process data, not a part number

Fluid, chemistry, concentration, temperature, flow, pressure, line size, and current equipment — that's what a real spec review needs to start.

Request a spec review →Get the Dispensing Guide

Ready to buy or need a fast answer? Call, text, or email James directly — (559) 395-5500 · [email protected].

Adhesive/Sealant Dispensing

Other adhesive/sealant dispensing categories

Advanced Glazing Proportioner (ExactaBlend AGP)Automated Adhesive Dispensing System (GSD)Benchtop Meter-Mix-Dispense System (PR70)Bulk Hot Melt System (Therm-O-Flow)Bulk Warm Melt Supply System (Therm-O-Flow)Cartridge / Pail Mini-Extruder (Dynamite)Drum Unloader Supply System (UniDrum)Electric Fixed Ratio Meter-Mix Proportioner (EFR)Electric Sealant Supply Pump (E-Flo SP)Electric Variable Ratio Meter-Mix Proportioner (EVR)Hot Melt Pattern Controller (PC-8 / PC-8e)Hydraulic Fixed Ratio Meter-Mix-Dispense System (HFR)One-Component Tank-to-Tip Metering System (E-Flo iQ)Posi-Ratio Meter-Mix-Dispense System (PR-X / PR-Xv)Precision Continuous Flow Metering System (PCF)Precision Shot Meter Dispense System (PSM)Sealant Meters, Regulators & Fluid Hoses Sealant Supply Pump System (Check-Mate)Sealant Supply Pump System (Dura-Flo)Tank-Free Hot Melt System (InvisiPac)

Free spec review

Send James your spec

Fluid, concentration, temperature, flow or volume, and where it goes. James replies with a real answer, not a catalog page.

Reviewed by James Riggins, 30+ years specifying water and chemical process equipment · Updated October 13, 2026