Chemical Scrubber — Caustics/Bases
30+ years spec experience. Send James the process data and get a real answer — not a catalog page.
Request a Spec Review →Named chemicals
LibertyCES has documented Chemical Scrubber in Caustics/Bases service, including Ammonia and Cyanogen chloride gas hazard. Wetted materials to confirm: FRP and Polypropylene. Documented models include Perry Fiberglass Chemical Scrubbers and GF Signet fume scrubbing. Compatibility depends on exact concentration, temperature and duty cycle, so confirm with a free spec review.
Notes from the vendor documentation
GF Signet explicitly names cyanogen chloride gas hazard requiring scrubber-adjacent process control if pH is mismanaged during cyanide destruction.
Materials documented for this service
- FRP
- Polypropylene
Products cited for this service
Real Specifications
| Spec | Value | Source document |
|---|---|---|
| Named target odor compounds (Perry brochure) | H2S, Aldehydes, NH3, Amines, Acetic Acids, Ketones | Perry Fiberglass Products |
| Reference NH3 install | "NH3 (Ammonia) chemical scrubber for an industrial plant" — three vessels shown loaded for delivery | Perry Fiberglass Products |
| Cyanide destruction two-step gas hazard | Stage 1 pH must be adjusted rapidly to convert cyanide to cyanate — done too slowly, it risks releasing extremely toxic cyanogen chloride gas | GF Piping Systems — Application Solutions Made Easy: Chemical Process Industry |
| Cyanide destruction batch-process setpoints | pH raised to 11.5 with sodium hydroxide, chlorine added until ORP reaches +450mV; acid injection must be manually locked out below pH 11 | GF Piping Systems — Application Solutions Made Easy: Chemical Process Industry |
GF Signet's own batch cyanide-destruction warning is explicit: acid injection must be manually locked out to prevent pH dropping below 11, because below that point the process both fails to fully oxidize cyanide to cyanate and risks releasing toxic cyanogen chloride gas.
Cyanide destruction generates its own gas hazard mid-process — GF Signet's own documentation requires pH to be adjusted rapidly in Stage 1, or locked out below pH 11 in the batch process, specifically to avoid releasing cyanogen chloride gas. A scrubber sized only for the ammonia and standard odor compounds Perry's APOLLO/OMEGA/ODYSSEY line targets is the wrong spec if the upstream cyanide-destruction pH control isn't accounted for in the same system design.
Every material and product claim on this page traces to real, vendor-published documentation on file with LibertyCES. Chemical compatibility depends on exact concentration, temperature, and duty cycle — confirm current specifications with the manufacturer and request a spec review before final specification.
FAQ
Can Chemical Scrubber handle Caustics/Bases?
GF Signet explicitly names cyanogen chloride gas hazard requiring scrubber-adjacent process control if pH is mismanaged during cyanide destruction.
What wetted materials should Chemical Scrubber use in Caustics/Bases service?
Materials documented for this service: FRP, Polypropylene. Compatibility depends on exact concentration, temperature and duty cycle, so confirm with a spec review before final specification.
Which Caustics/Bases chemicals does this cover?
Named chemicals in this documentation: Ammonia, Cyanogen chloride gas hazard (cyanide destruction off-gas).
Which Chemical Scrubber models are documented for Caustics/Bases?
Documented examples include Perry Fiberglass Chemical Scrubbers, GF Signet fume scrubbing (cyanide destruction).
Ready to buy or need a fast answer? Call, text, or email James directly — (559) 395-5500 · [email protected].
Send James your spec
Fluid, concentration, temperature, flow or volume, and where it goes. James replies with a real answer, not a catalog page.
Reviewed by James Riggins, 30+ years specifying water and chemical process equipment · Updated