Actuator for Municipal Wastewater
30+ years spec experience. Send James the process data and get a real answer — not a catalog page.
Request a Spec Review →Yes. LibertyCES has documented Actuator in Municipal Wastewater applications, including Hayward Industrial Electric Actuator. The right model depends on the fluid, concentration, temperature, flow and duty cycle, so send James your process data for a free spec review before final selection.
Notes from the vendor documentation
Wastewater listed as target sector for Hayward's broader valve/actuator line.
Products cited in this application
Real Specifications
| Spec | Value | Source document |
|---|---|---|
| HRS Series torque range | 266 to 177,000 in-lbs | Hayward Flow Control — Mining Guide |
| HRS Series enclosure | NEMA 4X / IP67, internal heater standard | Hayward Flow Control — Mining Guide |
| ECP Series housing & switches | Corrosion-resistant GFPP housing, LED status light, 4 SPDT micro limit switches, 100% factory tested | Hayward Flow Control — Mining Guide |
| ECP Series valve compatibility | Ball & Butterfly Valves up to 6"/DN150 | Hayward Flow Control — Mining Guide |
Hayward's ECP housing is GFPP specifically for corrosion resistance, not just cost — an actuator bolted to a wastewater valve lives in the same corrosive atmosphere as the process fluid, and an aluminum housing picked on torque spec alone is a shorter-lived install than the valve underneath it.
Every claim on this page traces to real, vendor-published documentation on file with LibertyCES. Confirm current specifications with the manufacturer before final specification.
Related Guides
FAQ
How is Actuator used in Municipal Wastewater?
Wastewater listed as target sector for Hayward's broader valve/actuator line.
Which Actuator models are specified for Municipal Wastewater?
Documented models include Hayward Industrial Electric Actuator. Confirm current specifications with the manufacturer before final selection.
What does LibertyCES need to size Actuator for a Municipal Wastewater application?
The fluid and its concentration, operating temperature, flow or volume, pressure and suction conditions, duty cycle, and the existing equipment it replaces or connects to. James reviews it for free.
Ready to buy or need a fast answer? Call, text, or email James directly — (559) 395-5500 · [email protected].
Send James your spec
Fluid, concentration, temperature, flow or volume, and where it goes. James replies with a real answer, not a catalog page.
Reviewed by James Riggins, 30+ years specifying water and chemical process equipment · Updated