Thermoplastic Metal-Replacement Valve Set (Butterfly, Diaphragm, Gate, Wafer Check) for Printing
30+ years spec experience. Send James the process data and get a real answer — not a catalog page.
Request a Spec Review →What LibertyCES's vendor documentation shows
Printing is one of the industries Asahi names for its 5-family metal-replacement set (semiconductor, mining, pulp and paper, electroplating, printing, landfills, aquaculture, wastewater, aquariums, theme parks, cruise ships). Industry-list evidence with no printing-specific spec, but the named chemistries on the same source — solvents, oxidizers, caustics, acidic waste — are press-wash and fountain-solution chemistry. The Type-14 weir design seals bubble-tight even with pigment/ink solids and its 3-layer diaphragm's PVDF gas barrier resists solvent-vapor permeation; the Wafer Check's 120°F maximum is the lowest ceiling of the five families and rules it out of heated dryer-side loops. ISO 5752 short pattern is the commercial hook: drop-in replacement when a metal valve corrodes out.
Products cited in this application
Real Specifications
| Type-14 diaphragm valve pressure/temp | 150 psi @ 70°F (elastomeric and PTFE diaphragms), 1/2"-4" | asahi-america-metal-replacement-valves.md |
| Type-14 diaphragm construction | 3-layer EPDM/PVDF/PTFE diaphragm; PVDF gas barrier standard on all PTFE-diaphragm valves to protect the EPDM backing layer from gas permeation | asahi-america-metal-replacement-valves.md |
| Wafer Check Valve pressure & temp limit | 150 psi (3"-8"), 85 psi (10"-12"), max 120°F | asahi-america-metal-replacement-valves.md |
| Type P Gate Valve pressure by size | 150 psi @ 70°F (1-1/2"-8"); 110 psi (10"); 75 psi (12"-14") | asahi-america-metal-replacement-valves.md |
Printing is one of the named industries for this exact 5-family set, and press-wash solvents plus fountain-solution acids are the real chemistry behind it — the Type-14's bubble-tight weir seal even with pigment/ink solids, and its PVDF gas barrier against solvent-vapor permeation, are the actual reasons this family fits a pressroom, not just its drop-in flange spacing.
Every claim on this page traces to real, vendor-published documentation on file with LibertyCES. Confirm current specifications with the manufacturer before final specification.
Related Guides
FAQ
Is Thermoplastic Metal-Replacement Valve Set (Butterfly, Diaphragm, Gate, Wafer Check) used in Printing?
Printing is one of the industries Asahi names for its 5-family metal-replacement set (semiconductor, mining, pulp and paper, electroplating, printing, landfills, aquaculture, wastewater, aquariums, theme parks, cruise ships). Industry-list evidence with no printing-specific spec, but the named chemistries on the same source — solvents, oxidizers, caustics, acidic waste — are press-wash and fountain-solution chemistry. The Type-14 weir design seals bubble-tight even with pigment/ink solids and its 3-layer diaphragm's PVDF gas barrier resists solvent-vapor permeation; the Wafer Check's 120°F maximum is the lowest ceiling of the five families and rules it out of heated dryer-side loops. ISO 5752 short pattern is the commercial hook: drop-in replacement when a metal valve corrodes out. This is moderate evidence.
What products are specified for Thermoplastic Metal-Replacement Valve Set (Butterfly, Diaphragm, Gate, Wafer Check) in Printing?
Documented examples include Asahi/America Type-57 LIS butterfly (3"-8", 150psi @70°F, ISO 5752 short pattern, Class 6 bubble-tight), Type-55 IS butterfly (PTFE disc, PTFE/Neoprene-backed seat, 2"-12" @150psi, 14"/16" @100psi), Type-14 Flanged Diaphragm Valve (1/2"-4", EPDM or 3-layer EPDM/PVDF/PTFE diaphragm), Type P Gate Valve (2"-8" standard, High Impact PVC, no metal-to-media contact), Wafer Check Valve (3"-12", 150psi 3"-8" / 85psi 10"-12", max 120°F) — confirm current specifications with the manufacturer before final selection.
Ready to buy or need a fast answer? Call, text, or email James directly — (559) 395-5500 · [email protected].