Peristaltic Hose Pump — Caustics/Bases
30+ years spec experience. Send James the process data and get a real answer — not a catalog page.
Request a Spec Review →Named chemicals
What LibertyCES's vendor documentation shows
Fixes a real hole — lime slurry / calcium hydroxide was missing entirely as a notable_chemical under Caustics/Bases despite being the subject of a LibertyCES case study. The rule is the content, not the pump: for a crystallizing slurry the failure mode is chemistry/mechanics mismatch, not pump strength — 'fewer places for the chemical to sit, dry, crystallize' rather than more force. Measured outcomes: clog shutdowns from ~10/year (4-6 hrs each) to zero, hose life 12+ months, labor savings $3,900-$6,500/year. Mechanism: single roller compressing an engineered hose through 360°, no valves/seals/glands in the fluid path, reversible to clear blockages without disassembly, self-priming. Corroborated by the chart's 316SS-only-G rating on calcium hydroxide and carbonate — a metal-wetted pump is the weaker material choice before crystallization mechanics are even considered.
Materials documented for this service
- Hose: Nitrile, EPDM, natural rubber, CSM/Hypalon
- Barb: 316 stainless steel, Hastelloy-C, PVDF
- Flowline chart, Calcium Hydroxide saturated @ 40°C/104°F: PVC E, PP E, PVDF E, PFA E, PTFE E, 316SS only G
- Flowline chart, Calcium Carbonate saturated: 316SS G at both 40°C and 80°C while all thermoplastics rate E
Products cited for this service
Real Specifications
| SoloTech 30 spec | 30mm hose, up to 16.0 GPM max @ 91 rpm — the model specified on the California water treatment plant lime slurry job | allied-fluid-products-line-card.md |
| Case study results | Clog shutdowns from ~10/year (4-6 hrs each) to zero; hose life 12+ months; labor savings $3,900-$6,500/year | solotech-lime-slurry.md |
| Flowline chart, Calcium Hydroxide | Saturated at 40°C/104°F: PVC, PP, PVDF, PFA, and PTFE all rate E (Excellent); 316SS rates only G (Good) | flowline-chemical-compatibility.csv |
| Flowline chart, Calcium Carbonate | Saturated: 316SS rates G (Good) at both 40°C and 80°C while every thermoplastic in the chart rates E (Excellent) | flowline-chemical-compatibility.csv |
SoloTech's mechanism is the fix, not raw pump strength: single roller compressing an engineered hose through 360° of rotation, no valves/seals/glands in the fluid path, reversible to clear blockages without disassembly, self-priming for reliable restarts after a pause.
James Riggins specified this pump on the reasoning that a crystallizing slurry fails on chemistry-mechanics mismatch, not pump strength — the fix is fewer places for the chemical to sit and crystallize, not more force — and the Flowline chart backs that structurally: 316 stainless only rates Good on calcium hydroxide and carbonate while every thermoplastic in the chart rates Excellent, so a metal-wetted pump is the weaker material choice before crystallization mechanics even enter the picture.
Every material and product claim on this page traces to real, vendor-published documentation on file with LibertyCES. Chemical compatibility depends on exact concentration, temperature, and duty cycle — confirm current specifications with the manufacturer and request a spec review before final specification.
FAQ
Is Peristaltic Hose Pump compatible with Caustics/Bases?
Fixes a real hole — lime slurry / calcium hydroxide was missing entirely as a notable_chemical under Caustics/Bases despite being the subject of a LibertyCES case study. The rule is the content, not the pump: for a crystallizing slurry the failure mode is chemistry/mechanics mismatch, not pump strength — 'fewer places for the chemical to sit, dry, crystallize' rather than more force. Measured outcomes: clog shutdowns from ~10/year (4-6 hrs each) to zero, hose life 12+ months, labor savings $3,900-$6,500/year. Mechanism: single roller compressing an engineered hose through 360°, no valves/seals/glands in the fluid path, reversible to clear blockages without disassembly, self-priming. Corroborated by the chart's 316SS-only-G rating on calcium hydroxide and carbonate — a metal-wetted pump is the weaker material choice before crystallization mechanics are even considered. This is strong evidence.
What materials are documented for Peristaltic Hose Pump in Caustics/Bases service?
Materials documented for this service: Hose: Nitrile, EPDM, natural rubber, CSM/Hypalon, Barb: 316 stainless steel, Hastelloy-C, PVDF, Flowline chart, Calcium Hydroxide saturated @ 40°C/104°F: PVC E, PP E, PVDF E, PFA E, PTFE E, 316SS only G, Flowline chart, Calcium Carbonate saturated: 316SS G at both 40°C and 80°C while all thermoplastics rate E. Chemical compatibility depends on exact concentration, temperature, and duty cycle — confirm with a spec review before final specification.
What specific Caustics/Bases chemicals does this cover?
Named chemicals in this documentation: lime slurry, calcium hydroxide (Ca(OH)2), hydrated lime / milk of lime, calcium carbonate (CaCO3).
What products are cited for Peristaltic Hose Pump in Caustics/Bases service?
Documented examples include Graco SoloTech 30 (30mm hose, 16.0 GPM max @ 91 rpm) — the model specified on the California water treatment plant lime slurry job, SoloTech 10 (10mm, 0.685 GPM @ 92 rpm), SoloTech 23 (23mm, 4.75 GPM @ 94 rpm), SoloTech 26 (26mm, 10.18 GPM @ 93 rpm), SoloTech Peristaltic Industrial: 98 total SKUs across motor type x hose material x barb material; sample real SKUs 19X001, 19X010, 19X018, 19X022, 19X025, 19X026, 19X027, 19X029.
Ready to buy or need a fast answer? Call, text, or email James directly — (559) 395-5500 · [email protected].