Pipe — Acids
30+ years spec experience. Send James the process data and get a real answer — not a catalog page.
Request a Spec Review →Named chemicals
What LibertyCES's vendor documentation shows
26 real named installed-project case list with field concentrations, several exceeding general resistance tables (93% sulfuric acid seen twice).
Materials documented for this service
- Advanced PE (NSF/ANSI/CAN 61-G)
- ECTFE/Halar (chosen over Advanced PE for H2SO4 in one RO plant)
Products cited for this service
Real Specifications
| Sulfuric acid resistance ceiling (general table) | Resistant up to 85% concentration, PVC/FKM valve pairing | asahi-america-advanced-pe-piping.md |
| 93% sulfuric acid real field installs | Anomatic OH (2013, replaced CPVC) and Chemco CA (2013, replaced PVC) both ran 93% H2SO4 in Chem Proline, above the general table's stated 85% ceiling | asahi-america-advanced-pe-piping.md |
| Hydrochloric acid resistance | Resistant to 37% HCl, PVC/FKM valve pairing, Vented Ball Valves required for off-gas relief | asahi-america-advanced-pe-piping.md |
| Hydrofluosilicic acid resistance | Resistant up to 50% concentration (fluoridation dosing), PVC/EPDM valve pairing | asahi-america-advanced-pe-piping.md |
| ALD70 valve diaphragm sulfuric acid limit | 38°C max — far below the pipe's 85%-concentration rating | netafim-mining-heap-leaching.md |
Two of Asahi's 26 documented Advanced PE installations ran 93% sulfuric acid — Anomatic OH and Chemco CA, both 2013, both replacing failed CPVC or PVC — above the general resistance table's own stated 85% ceiling; a real field data point to flag to engineering before quoting, not an automatic green light past 85%.
Acid service piping fails at whichever component has the lowest real ceiling, not the pipe body — Netafim's own ALD70 valve diaphragm caps sulfuric acid at 38°C while Advanced PE pipe carries it to 85% concentration at operating temperature, exactly the kind of mismatch a category-level "acid-resistant piping" quote misses.
Every material and product claim on this page traces to real, vendor-published documentation on file with LibertyCES. Chemical compatibility depends on exact concentration, temperature, and duty cycle — confirm current specifications with the manufacturer and request a spec review before final specification.
FAQ
Is Pipe compatible with Acids?
26 real named installed-project case list with field concentrations, several exceeding general resistance tables (93% sulfuric acid seen twice). This is strong evidence.
What materials are documented for Pipe in Acids service?
Materials documented for this service: Advanced PE (NSF/ANSI/CAN 61-G), ECTFE/Halar (chosen over Advanced PE for H2SO4 in one RO plant). Chemical compatibility depends on exact concentration, temperature, and duty cycle — confirm with a spec review before final specification.
What specific Acids chemicals does this cover?
Named chemicals in this documentation: Sulfuric Acid (93%), Hydrochloric Acid, Hydrofluosilicic Acid.
What products are cited for Pipe in Acids service?
Documented examples include Asahi Advanced PE / Chem Proline / Ultra Proline, Netafim FlexNet HP (heap leach).
Ready to buy or need a fast answer? Call, text, or email James directly — (559) 395-5500 · [email protected].