Controller / Process Analyzer for Laundry
30+ years spec experience. Send James the process data and get a real answer — not a catalog page.
Request a Spec Review →Yes. LibertyCES has documented Controller / Process Analyzer in Laundry applications, including Walchem Intuition-9 Series, Walchem Intuition 6 and Walchem W600 Series. The right model depends on the fluid, concentration, temperature, flow and duty cycle, so send James your process data for a free spec review before final selection.
Notes from the vendor documentation
Becker's stated rule — specific chemical determines sensor count/type — applies to the Laundry line. Becker IoT Live is the real remote layer (up to 4 pumps into 1 IoT device per its ProMinent page).
Products cited in this application
Real Specifications
| Spec | Value | Source document |
|---|---|---|
| Becker IoT Live capacity | Up to 4 pumps into 1 IoT device | Becker Engineered Systems |
| Becker IoT Live connectivity | Modbus TCP Ethernet or RTU Serial, cellular gateway with private dynamic IP | Becker Engineered Systems |
| Becker IoT Live alerting | Customizable email/text alarms and alarm-event history, no LAN access needed | Becker Engineered Systems |
| EWP Series metering pump (Walchem/Iwaki replacement line) | Flow rates up to 6.7 GPH (25 l/h), pressure to 300 PSI (20 bar), IP66 housing | Becker Engineered Systems |
Walchem's EZ Series metering pump line is being discontinued effective July 31, 2026, replaced by the EWP-L Series — Becker will continue supplying EZ Series units while supply lasts, then quote the comparable EWP model once stock runs out, a real supersession worth confirming before specifying a laundry chemical feed system against the older line.
A laundry chemical feed system's real design decision isn't the controller model number — Becker's own process is that "the specific chemical determines sensor count/type," and almost every system uses pH and conductivity probes as the base loop. Becker IoT Live layers remote monitoring on top of that, running up to 4 pumps per IoT device over Modbus without needing a LAN connection at the laundry site.
Every claim on this page traces to real, vendor-published documentation on file with LibertyCES. Confirm current specifications with the manufacturer before final specification.
FAQ
How is Controller / Process Analyzer used in Laundry?
Becker's stated rule — specific chemical determines sensor count/type — applies to the Laundry line. Becker IoT Live is the real remote layer (up to 4 pumps into 1 IoT device per its ProMinent page).
Which Controller / Process Analyzer models are specified for Laundry?
Documented models include Walchem Intuition-9 Series, Walchem Intuition 6, Walchem W600 Series, Walchem W100 Series, Becker IoT Live. Confirm current specifications with the manufacturer before final selection.
What does LibertyCES need to size Controller / Process Analyzer for a Laundry application?
The fluid and its concentration, operating temperature, flow or volume, pressure and suction conditions, duty cycle, and the existing equipment it replaces or connects to. James reviews it for free.
Ready to buy or need a fast answer? Call, text, or email James directly — (559) 395-5500 · [email protected].
Send James your spec
Fluid, concentration, temperature, flow or volume, and where it goes. James replies with a real answer, not a catalog page.
Reviewed by James Riggins, 30+ years specifying water and chemical process equipment · Updated