Hydraulic Fixed Ratio Meter-Mix-Dispense System (HFR) for Automotive Components
30+ years spec experience. Send James the process data and get a real answer — not a catalog page.
Request a Spec Review →Yes. LibertyCES has documented Hydraulic Fixed Ratio Meter-Mix-Dispense System (HFR) in Automotive Components applications, including Graco Hydraulic Fixed Ratio System, 1. The right model depends on the fluid, concentration, temperature, flow and duty cycle, so send James your process data for a free spec review before final selection.
Products cited in this application
Real Specifications
| Spec | Value | Source document |
|---|---|---|
| NVH Foam System SKU | 24M504 — Hydraulic Fixed Ratio, 160/160, Carbon Steel | Graco — Sealants & Adhesives |
| 1:1 Ratio SKU | HFRSA1 — Hydraulic Fixed Ratio System, 1:1 ratio, Carbon Steel | Graco — Sealants & Adhesives |
| Ratio range (comparison table) | 1:1 to 32:1 | Graco — Sealants & Adhesives |
| Minimum shot size (comparison table) | 30cc — the highest minimum shot size of the 4 platforms Graco compares (PD44, PR70, EFR, HFR) | Graco — Sealants & Adhesives |
| Mixing options | Static, dynamic, or impingement mixing | Graco — Sealants & Adhesives |
HFR is the only hydraulic-drive platform in Graco's own comparison table and carries the highest minimum shot size (30cc) of the four compared — specifying it below that volume, where a lower-cost pneumatic/servo drive already covers the range, is an oversized fit.
SKU 24M504 is literally named for an NVH foam system — automotive body-cavity acoustic foam — so the automotive tie here is at the part-number level, not a marketing category. HFR's 30cc minimum shot and hydraulic drive are the right call when volume genuinely exceeds what PR70 or EFR can deliver; specifying it below that threshold is buying capacity the application doesn't use.
Every claim on this page traces to real, vendor-published documentation on file with LibertyCES. Confirm current specifications with the manufacturer before final specification.
FAQ
How is Hydraulic Fixed Ratio Meter-Mix-Dispense System (HFR) used in Automotive Components?
LibertyCES has documented Hydraulic Fixed Ratio Meter-Mix-Dispense System (HFR) specified in Automotive Components applications.
Which Hydraulic Fixed Ratio Meter-Mix-Dispense System (HFR) models are specified for Automotive Components?
Documented models include Graco Hydraulic Fixed Ratio for NVH Foam System, 160/160 Carbon Steel, Part# 24M504, Graco Hydraulic Fixed Ratio System, 1. Confirm current specifications with the manufacturer before final selection.
What does LibertyCES need to size Hydraulic Fixed Ratio Meter-Mix-Dispense System (HFR) for a Automotive Components application?
The fluid and its concentration, operating temperature, flow or volume, pressure and suction conditions, duty cycle, and the existing equipment it replaces or connects to. James reviews it for free.
Ready to buy or need a fast answer? Call, text, or email James directly — (559) 395-5500 · [email protected].
Send James your spec
Fluid, concentration, temperature, flow or volume, and where it goes. James replies with a real answer, not a catalog page.
Reviewed by James Riggins, 30+ years specifying water and chemical process equipment · Updated