One-Component Tank-to-Tip Metering System (E-Flo iQ) for Automotive Components
30+ years spec experience. Send James the process data and get a real answer — not a catalog page.
Request a Spec Review →Yes. LibertyCES has documented One-Component Tank-to-Tip Metering System (E-Flo iQ) in Automotive Components applications, including Graco E-Flo iQ, Graco iQ-T dispense valve and 26B552 tandem urethane system. The right model depends on the fluid, concentration, temperature, flow and duty cycle, so send James your process data for a free spec review before final selection.
Products cited in this application
Real Specifications
| Spec | Value | Source document |
|---|---|---|
| Total SKU count | 30 total SKUs | Graco — Sealants & Adhesives |
| Pump component | Check-Mate 200cc pump | Graco — Sealants & Adhesives |
| Drum capacity/heating | Heated 55-gallon drums (D200s) | Graco — Sealants & Adhesives |
| Axial Valve example duty | High flow, e.g. window urethane | Graco — Sealants & Adhesives |
| Wear life (Elite construction) | 50,000+ gallons before piston/cylinder wear is noticeable, 10x+ life vs. standard | Graco — Sealants & Adhesives |
E-Flo iQ shares the same Elite-construction wear-life rating as EFR/EVR/HFR — 50,000+ gallons before piston/cylinder wear is noticeable — so an automotive glass-bonding line running abrasive urethane through a non-Elite configuration will see wear well short of that figure.
The Axial Valve's own stated example is window urethane — automotive glass bonding — dispensed tank-to-tip straight from a heated 55-gallon drum with no external dosing system. That's the real reason to spec E-Flo iQ over a drum-plus-day-tank architecture: one less transfer step where urethane can skin over or pick up contamination.
Every claim on this page traces to real, vendor-published documentation on file with LibertyCES. Confirm current specifications with the manufacturer before final specification.
FAQ
How is One-Component Tank-to-Tip Metering System (E-Flo iQ) used in Automotive Components?
LibertyCES has documented One-Component Tank-to-Tip Metering System (E-Flo iQ) specified in Automotive Components applications.
Which One-Component Tank-to-Tip Metering System (E-Flo iQ) models are specified for Automotive Components?
Documented models include Graco E-Flo iQ, Graco iQ-T dispense valve, 26B552 tandem urethane system. Confirm current specifications with the manufacturer before final selection.
What does LibertyCES need to size One-Component Tank-to-Tip Metering System (E-Flo iQ) for a Automotive Components application?
The fluid and its concentration, operating temperature, flow or volume, pressure and suction conditions, duty cycle, and the existing equipment it replaces or connects to. James reviews it for free.
Ready to buy or need a fast answer? Call, text, or email James directly — (559) 395-5500 · [email protected].
Send James your spec
Fluid, concentration, temperature, flow or volume, and where it goes. James replies with a real answer, not a catalog page.
Reviewed by James Riggins, 30+ years specifying water and chemical process equipment · Updated