Diaphragm Pump for Mining
30+ years spec experience. Send James the process data and get a real answer — not a catalog page.
Request a Spec Review →Yes. LibertyCES has documented Diaphragm Pump in Mining applications, including Graco QUANTM and Husky. The right model depends on the fluid, concentration, temperature, flow and duty cycle, so send James your process data for a free spec review before final selection.
Notes from the vendor documentation
Dedicated LibertyCES case study: abrasive slurry transfer at a California mining operation using Graco QUANTM.
Products cited in this application
Real Specifications
| Spec | Value | Source document |
|---|---|---|
| QUANTM i30 spec | 30 GPM (114 lpm) at up to 100 psi, 120V or 380/480V | Graco — Diaphragm Pumps |
| QUANTM energy claim | Up to 80% lower energy cost vs. air-operated alternatives | Graco — Diaphragm Pumps |
| Husky 716 materials | Fluid section aluminum or stainless steel; diaphragm options include Fluoroelastomer, Buna-N, Santoprene, PTFE Overmold, PTFE/EPDM 2-Piece, TPE (Hytrel) | Graco — Diaphragm Pumps |
| Case study outcome | California mining operation eliminated unplanned shutdowns and gained real-time SCADA visibility after switching from centrifugal to QUANTM electric diaphragm | LibertyCES field case study: Mining Slurry Pump Failure |
Case-study engineering rule, direct quote: 'Centrifugal pumps were never going to survive in that slurry. We spec'd the QUANTM because it reduced the prior seal-failure mode, and we tied it into SCADA so the plant never has to fly blind again' — James Riggins. Abrasive slurry duty should avoid centrifugal pumps (seal failure mode) and specify electric diaphragm instead.
Centrifugal pumps were never built to survive continuous abrasive-slurry duty — the mechanical seal is the failure point. James Riggins specified Graco's QUANTM electric diaphragm pump on this mining job specifically to remove that failure mode, then tied it into SCADA so the plant isn't finding out about a seal failure the hard way.
Every claim on this page traces to real, vendor-published documentation on file with LibertyCES. Confirm current specifications with the manufacturer before final specification.
Related Guides
FAQ
How is Diaphragm Pump used in Mining?
Dedicated LibertyCES case study: abrasive slurry transfer at a California mining operation using Graco QUANTM.
Which Diaphragm Pump models are specified for Mining?
Documented models include Graco QUANTM, Husky. Confirm current specifications with the manufacturer before final selection.
What does LibertyCES need to size Diaphragm Pump for a Mining application?
The fluid and its concentration, operating temperature, flow or volume, pressure and suction conditions, duty cycle, and the existing equipment it replaces or connects to. James reviews it for free.
Ready to buy or need a fast answer? Call, text, or email James directly — (559) 395-5500 · [email protected].
Send James your spec
Fluid, concentration, temperature, flow or volume, and where it goes. James replies with a real answer, not a catalog page.
Reviewed by James Riggins, 30+ years specifying water and chemical process equipment · Updated