Controller for Mining
30+ years spec experience. Send James the process data and get a real answer — not a catalog page.
Request a Spec Review →Yes. LibertyCES has documented Controller in Mining applications, including Hayward HMC200/300. The right model depends on the fluid, concentration, temperature, flow and duty cycle, so send James your process data for a free spec review before final selection.
Notes from the vendor documentation
Multi-parameter controllers listed in dedicated mining product guide.
Products cited in this application
Real Specifications
| Spec | Value | Source document |
|---|---|---|
| Hayward HMC200 parameters | pH, ORP, conductivity & flow; multipoint conductivity calibration for acids and bases | Hayward Flow Control — Mining Guide |
| Hayward HMC200 output | 4-20mA process output with range scaling and PID control | Hayward Flow Control — Mining Guide |
| Hayward HMC300 inputs | Four 4-20mA sensor inputs in any combination: pH, ORP, conductivity, dissolved O2, chlorine, level | Hayward Flow Control — Mining Guide |
| Hayward HMC300 connectivity | Modbus TCP/IP-equivalent web-enabled features, email/text alerts | Hayward Flow Control — Mining Guide |
Mining process water swings between acid and alkaline circuits on the same site — heap leach uses sulfuric acid, cyanide circuits run alkaline — and Hayward's HMC200 is built with multipoint conductivity calibration for both acids and bases specifically because a controller calibrated for one chemistry reads wrong in the other.
Every claim on this page traces to real, vendor-published documentation on file with LibertyCES. Confirm current specifications with the manufacturer before final specification.
FAQ
How is Controller used in Mining?
Multi-parameter controllers listed in dedicated mining product guide.
Which Controller models are specified for Mining?
Documented models include Hayward HMC200/300. Confirm current specifications with the manufacturer before final selection.
What does LibertyCES need to size Controller for a Mining application?
The fluid and its concentration, operating temperature, flow or volume, pressure and suction conditions, duty cycle, and the existing equipment it replaces or connects to. James reviews it for free.
Ready to buy or need a fast answer? Call, text, or email James directly — (559) 395-5500 · [email protected].
Send James your spec
Fluid, concentration, temperature, flow or volume, and where it goes. James replies with a real answer, not a catalog page.
Reviewed by James Riggins, 30+ years specifying water and chemical process equipment · Updated