Flow Meter — Salts/Brines
30+ years spec experience. Send James the process data and get a real answer — not a catalog page.
Request a Spec Review →Named chemicals
LibertyCES has documented Flow Meter in Salts/Brines service, including Ferric Chloride and Ammonium Sulfate. Wetted materials to confirm: PVDF/PEEK. Documented models include Blue-White MS6. Compatibility depends on exact concentration, temperature and duty cycle, so confirm with a free spec review.
Notes from the vendor documentation
Both salts included in MS6's factory-calibrated 7-chemical list.
Materials documented for this service
- PVDF/PEEK
Products cited for this service
Real Specifications
| Spec | Value | Source document |
|---|---|---|
| MS6 factory-calibrated concentrations | Ferric Chloride 40%, Ammonium Sulfate 10% | Blue-White Industries — Flow Meters |
| MS6 flow range | 10-10,000 mL/min (0.158-158.5 GPH) | Blue-White Industries — Flow Meters |
| MS6 max pressure | 200 psi (13.78 bar) | Blue-White Industries — Flow Meters |
| MS6 fitting options | ½" barb, ½" M/NPT, ½" PVC slip | Blue-White Industries — Flow Meters |
Ferric chloride and ammonium sulfate are both in MS6's 7-chemical factory list — a different salt or a higher concentration than 40%/10% falls outside the standard calibration and needs a factory custom-calibration request before ordering.
Ferric chloride is corrosive and stains on contact, which is exactly the kind of chemical where a flowmeter needs a specific factory-verified calibration rather than a generic 'PVDF is corrosion-resistant' assumption — Blue-White's own 7-chemical pre-calibration list is the actual evidence a spec should point to, not the body-material datasheet alone.
Every material and product claim on this page traces to real, vendor-published documentation on file with LibertyCES. Chemical compatibility depends on exact concentration, temperature, and duty cycle — confirm current specifications with the manufacturer and request a spec review before final specification.
FAQ
Can Flow Meter handle Salts/Brines?
Both salts included in MS6's factory-calibrated 7-chemical list.
What wetted materials should Flow Meter use in Salts/Brines service?
Materials documented for this service: PVDF/PEEK. Compatibility depends on exact concentration, temperature and duty cycle, so confirm with a spec review before final specification.
Which Salts/Brines chemicals does this cover?
Named chemicals in this documentation: Ferric Chloride (40%), Ammonium Sulfate (10%).
Which Flow Meter models are documented for Salts/Brines?
Documented examples include Blue-White MS6.
Ready to buy or need a fast answer? Call, text, or email James directly — (559) 395-5500 · [email protected].
Send James your spec
Fluid, concentration, temperature, flow or volume, and where it goes. James replies with a real answer, not a catalog page.
Reviewed by James Riggins, 30+ years specifying water and chemical process equipment · Updated