Storage Tank for Mining
30+ years spec experience. Send James the process data and get a real answer — not a catalog page.
Request a Spec Review →Yes. LibertyCES has documented Storage Tank in Mining applications, including Houston PolyTank. The right model depends on the fluid, concentration, temperature, flow and duty cycle, so send James your process data for a free spec review before final selection.
Notes from the vendor documentation
Mining explicitly named application sector.
Products cited in this application
Real Specifications
| Spec | Value | Source document |
|---|---|---|
| Houston PolyTank industries served | Chemical, Oil & Gas, Mining, Agriculture, Water Treatment, Pharmaceuticals, Steel, Petroleum, Municipalities, Energy, Food Processing | Houston PolyTank — Website (Applications, Industries, Accessories) |
| Houston PolyTank Rectangular Tank capacity | Up to 18,000 gallons, patented (US 10,150,264 B2) extrusion-wound single continuous PP structure, no welded joints | Houston PolyTank — Website (Applications, Industries, Accessories) |
| Schurco S Series rating | 1"-18" discharge, 240 ft head max, 22,000 gpm flow max, 300 psig working pressure max — heavy-duty end-suction/split-case centrifugal slurry pump for abrasive mining/industrial duty, named for Tailings and Ore Transport | Schurco Slurry USA — Slurry Pumps |
| Schurco H Series rating | 1"-6" discharge, 325 ft head max, 3,000 gpm flow max, 750 psig working pressure max — robust high-head pump for long-distance/high-pressure transport, named for Mine Dewatering and Tailings | Schurco Slurry USA — Slurry Pumps |
Schurco's own comparison flags H Series and L Series as opposite ends of the same pump family's range: H Series maxes out at 3,000 gpm but reaches 750 psig, while L Series reaches 30,000 gpm but only 250 psig — treating the two as interchangeable rather than matching duty point to series is a mismatch the pump won't hold up under at full load.
Mining slurry service pushes tanks and pumps through simultaneous abrasion and corrosion, and Schurco's own catalog shows how differently its S/L/H/V/U/Z/P Series are engineered for that: H Series trades flow for 750 psig of head, L Series trades pressure for 30,000 gpm of throughput. Matching the duty point to the series, not just picking whichever unit is in stock, is what keeps mining slurry equipment out of premature failure.
Every claim on this page traces to real, vendor-published documentation on file with LibertyCES. Confirm current specifications with the manufacturer before final specification.
FAQ
How is Storage Tank used in Mining?
Mining explicitly named application sector.
Which Storage Tank models are specified for Mining?
Documented models include Schurco S/L/H/V/U/Z/P Series pumps and tanks, Houston PolyTank. Confirm current specifications with the manufacturer before final selection.
What does LibertyCES need to size Storage Tank for a Mining application?
The fluid and its concentration, operating temperature, flow or volume, pressure and suction conditions, duty cycle, and the existing equipment it replaces or connects to. James reviews it for free.
Ready to buy or need a fast answer? Call, text, or email James directly — (559) 395-5500 · [email protected].
Send James your spec
Fluid, concentration, temperature, flow or volume, and where it goes. James replies with a real answer, not a catalog page.
Reviewed by James Riggins, 30+ years specifying water and chemical process equipment · Updated