Data Center Liquid Cooling: Valves and Pressure/Leak Monitoring
Isolation valves and pressure/leak monitoring hardware that two independent vendors categorize for data center liquid cooling loops — sized honestly to what each vendor actually publishes.
What the Evidence Actually Supports
Two independent vendors in the LibertyCES catalog put products in front of data center buyers. AVCO explicitly categorizes three of its valve product lines for data center applications. Badger Meter lists Data Centers as one of nine vendor-defined market facets on its Pressure and Leak Monitoring category. That is real, usable evidence — but it is evidence at the level of vendor categorization and a filter facet, not published data-center-specific engineering. Neither vendor publishes a dedicated data-center spec sheet, a coolant-compatibility chart written for this application, or a case study naming a data center customer. This page states the real specs of each product and is honest about where the sector attribution stops.
Four Product Families, Two Vendors
AVCO's 500 Series, 900 Series, and BFV HP are the three product lines AVCO itself categorizes for data center applications. Badger Meter's Telog RS-45, Ru-32mA, PIPEMINDER-ONE family, and RADAR platform sit behind its Pressure and Leak Monitoring category's Data Centers market facet.
Go Deeper on Each Vendor
AVCO Valve
Full ball, butterfly, and knife gate valve catalog — 500 Series, 900 Series, BFV HP, and the wider AVCO line.
Badger Meter
Pressure, level, and leak monitoring hardware, including the Telog RTU family behind the Data Centers market facet.
Frequently Asked Questions
Are AVCO's valves engineered specifically for data center liquid cooling loops?
No — AVCO categorizes the 500 Series, 900 Series, and BFV HP butterfly valve as applicable to data center applications, but this is a vendor category tag, not a data-center-specific engineering claim. The underlying valves are general-purpose industrial products (economy 3-piece ball, direct-mount full-port ball, and high-performance double-offset butterfly) whose pressure ratings, materials, and port design happen to fit closed-loop liquid cooling service.
Does Badger Meter publish data-center-specific pressure and leak monitoring products?
Badger Meter lists Data Centers as one of nine vendor-defined market facets on its Pressure and Leak Monitoring category page — a filter facet, not a dedicated product line or a data-center-specific spec sheet. The real hardware behind that facet (Telog RS-45, Ru-32mA, PIPEMINDER-ONE family, RADAR platform) is general-purpose pressure and leak-monitoring instrumentation.
What sizes and pressure classes are actually available across these four product families?
The 500 Series covers 1/4"–4" at 1000 WOG; the 900 Series covers 1/2"–8" at ANSI Class 150 / PN16; the BFV HP butterfly valve covers 2"–60" at Class 150 and 2"–36" at Class 300. Badger Meter's monitoring hardware is sold independent of valve size — it instruments the pipe, not the valve.
What does LibertyCES need to spec valves or monitoring for a liquid cooling loop?
Line size, working pressure, the coolant (glycol/water mix vs. dielectric fluid), whether direct actuation (ISO 5211) is required, and whether leak detection needs to report to a building-management or DCIM system — process data first, part number second, the same standard applied across every LibertyCES industry page.
Specifying valves or monitoring for a liquid cooling loop?
Send LibertyCES your line size, working pressure, and coolant — we'll confirm the right valve and monitoring fit before you spec a model.
Ready to buy or need a fast answer? Call, text, or email James directly — (559) 395-5500 · [email protected].