
Clack
Water treatment control valves manufactured in Wisconsin — including the WS2H/F, the twin progressive-kit valve LibertyCES specified for a real groundwater uranium-removal ion exchange system.
Clack manufactures water treatment control valves in Wisconsin. The WS2H/F is a twin progressive-kit ion exchange valve: communication cables link the primary and secondary valves into one lead/lag system, with a volumetric regeneration trigger set at a gallon throughput. LibertyCES specified it for a groundwater uranium-removal system, so WS-series valves serve more than water softening.
What LibertyCES specifies from Clack
Clack — Real Project Spec Data
| Product Line | Model | Category | Material | Configuration | Regeneration Trigger |
|---|---|---|---|---|---|
| Ion Exchange Control Valve | WS2H/F | Ion Exchange Control Valve | n/a | twin progressive-kit configuration | volumetric regeneration trigger |
Sourced from a real LibertyCES commissioning project (a California water utility’s groundwater system) — configuration shown is that specific project's engineered design, not a universal constant.
Frequently Asked Questions
What does a volumetric regeneration trigger do on an ion exchange control valve?
It fires regeneration at a pre-calculated gallon throughput setpoint (measured by the valve's own inline flow meter) rather than on a time clock or breakthrough sampling. This is the control philosophy used on a real LibertyCES ion exchange project (a California water utility’s groundwater system) with Clack WS2H/F valves, appropriate when breakthrough of a regulated contaminant — not just hardness — is the failure mode being guarded against.
What is a twin progressive-kit control valve configuration?
Two control valves, linked by communication cables, operating one pair of vessels in a lead/lag sequence rather than in parallel — one vessel is always polishing behind the other, which extends time-to-breakthrough. On the California groundwater uranium project, twin Clack WS2H/F valves ran the two-vessel progressive ion exchange system per site.
Are Clack control valves only used for water softening?
No. Clack WS-series valves are widely used for water softening, but the same WS2H/F valve family has also been specified by LibertyCES for a targeted contaminant-removal (non-softening) application — the California groundwater uranium ion exchange project — running volumetric regeneration instead of a softener's typical time-clock regeneration.
Get the right control valve for your ion exchange configuration
Ready to buy or need a fast answer? Call, text, or email James directly — (559) 395-5500 · [email protected].
Send James your spec
Fluid, concentration, temperature, flow or volume, and where it goes. James replies with a real answer, not a catalog page.
Reviewed by James Riggins, 30+ years specifying water and chemical process equipment · Updated