E-Water Solutions
LibertyCES's Southern California pump distribution partner — Goulds Water Technology (Xylem) submersible sewage and deep-well pumps, Crane Pumps & Systems (Barnes) solids-handling pumps, and Cornell Pump, with real flow, head, and material specs.
E-Water Solutions is a Southern California pump, well, and water and wastewater equipment distributor, not a manufacturer. It carries Goulds WS_D4 submersible sewage pumps (1.5 to 7.5 HP, roughly 620 GPM and 60 ft head maximum), Barnes Solids Handling pumps to 30 HP, and Cornell Pump lines published to 20,000 GPM. Send James your duty point.
30+ years spec experience. Send James your duty point — flow, head, and chemistry — and get a real answer, not a catalog page.
Request a Spec Review →What E-Water Solutions Is
E-Water Solutions, LLC is a pump/well/water & wastewater equipment distributor headquartered in Redlands, CA, with branches in Temecula and Walnut, CA. It carries multiple real manufacturer lines relevant to municipal and industrial water/wastewater work — Goulds Water Technology (Xylem), Crane Pumps & Systems (Barnes, Deming, Burks, Crown, Weinman), Cornell Pump, Flint & Walling, Wilo, Weil, Scot, Barmesa, Pacer, Lorentz, Munro, and North American Pipe. LibertyCES sources submersible sewage, effluent, grinder, and deep-well pumps through this relationship.
What LibertyCES specifies through E-Water Solutions
Cast iron volute, 2-vane semi-open non-clog impeller, dual mechanical seals, 300-series SS shaft, BUNA-N elastomers, 4in 125# ANSI flanged discharge, 3in max solids, 1750 RPM nominal.
Cast iron oil-filled submersible solids-handling pumps, 2-30 HP, 3in-6in discharge, 1150/1750/3450 RPM — reaches high-head duty points the smaller Goulds WS_D4 family does not.
Heavy-walled volute, 3-5in solids capacity, published range 80-20,000 GPM and 10-350 ft head — the deepest published capacity range among E-Water's carried lines.
Goulds WS_D4 Series — Real Model Spec Data
| Model | HP | Volts / Phase | Max GPM | Max Head (ft) |
|---|---|---|---|---|
| WS1532D4 | 1.5 | 230V / 3ph | 395 | 28 |
| WS2012D4 | 2 | 230V / 1ph | 415 | 34 |
| WS3032D4 | 3 | 230V / 3ph | 490 | 44 |
| WS3012D4 | 3 | 230V / 1ph | 490 | 44 |
| WS5012D4 | 5 | 230V / 1ph | 550 | 50 |
| WS5032D4 | 5 | 230V / 3ph | 550 | 50 |
| WS3037D4 | 3 | 575V / 3ph | 620 | 60 |
| WS7534D4 | 7.5 | 460V / 3ph | 620 | 58 |
| WS7537D4 | 7.5 | 575V / 3ph | 620 | — |
Sourced from pumpproducts.com model listings for the Goulds WS_D4 Series, cross-checked against a real municipal STP spec naming this exact family as basis-of-design. Confirm voltage tolerance (208V vs. published 230V) and inverter-duty rating with the E-Water rep before quoting a VFD-driven job.
When a Duty Point Exceeds Goulds WS_D4
The WS_D4 family tops out around 620 GPM and 60 ft of head. For higher-head or higher-flow submersible/solids-handling duty points, two other E-Water-carried lines are real, named candidates:
- Crane Pumps & Systems (Barnes) Solids Handling Series — published range to 305 ft head, 2-150 HP motors.
- Cornell Pump — published range 80-20,000 GPM, 10-350 ft head.
- Goulds 6in CentriPro submersible motors (deep-well) — single-phase 5-15 HP, three-phase standard line 5-30 HP, with an FM-Series extending to confirmed 20 HP and 50 HP models for deep-well duty separate from the sewage-pump family above.
Related Manufacturers & Products
Frequently Asked Questions
Is E-Water Solutions a manufacturer or a distributor?
E-Water Solutions, LLC is a Southern California pump/well/water & wastewater equipment distributor (HQ in Redlands, CA, with branches in Temecula and Walnut), not a single manufacturer. It carries multiple real brands — Goulds Water Technology (Xylem), Crane Pumps & Systems (Barnes/Deming/Burks/Crown/Weinman), Cornell Pump, Flint & Walling, Wilo, Weil, Scot, Barmesa, Pacer, Lorentz, Munro, and North American Pipe — and this is LibertyCES's route to market for those product lines.
What is the Goulds WS_D4 Series?
A submersible sewage pump family with cast iron volute construction, a 2-vane semi-open non-clog impeller, dual mechanical seals, a 300-series stainless steel shaft, and 4in 125# ANSI flanged discharge, rated for 3in max solids. Nine real model variants span 1.5-7.5 HP and up to 620 GPM / 60 ft head. It is the named basis-of-design product on at least one real LibertyCES municipal STP spec.
Does E-Water Solutions carry an inline multistage pump like Grundfos CR/CRN used to be?
Not confirmed at the SKU/curve level yet. Two real, named candidates exist on E-Water's own line card — Barmesa Pumps (vertical multistage) and Munro Pumps (MXS 5in multistage bottom-suction submersible) — but neither has a pulled spec sheet or performance curve on file. Send James your duty point (flow, head, chemistry) and he'll confirm the right E-Water line rather than assuming a match.
Does E-Water's pump line reach beyond the WS_D4 sewage pump family?
Yes. When a duty point exceeds the WS_D4 family's envelope (roughly 620 GPM / 60 ft head max), Crane Pumps & Systems' Barnes Solids Handling line reaches up to 30 HP and higher heads, and Cornell Pump's published range extends to 20,000 GPM and 350 ft head. E-Water also carries Goulds 6in CentriPro submersible motors for deep-well applications, separate from the sewage-pump family.
Get the right submersible or deep-well pump for your duty point
Ready to buy or need a fast answer? Call, text, or email James directly — (559) 395-5500 · [email protected].
Goulds Water Technology (Xylem) via E-Water Solutions models in the LibertyCES catalog
10 models across 2 product lines. For most models that state them (the middle 80%): flow 420–620 gpm (94,200–140,800 L/h). Extremes are in the table.
| Model / line | Type | Size / capacity / flow | Pressure | Temperature | Wetted material | Source |
|---|---|---|---|---|---|---|
| WS_D4 Series WS1532D4 | Pump | 395 gpm | Cast iron volute, 300-series SS shaft, BUNA-N elastomers, dual mechanical seals | Manufacturer documentation on file | ||
| WS_D4 Series WS2012D4 | Pump | 415 gpm | Cast iron volute, 300-series SS shaft, BUNA-N elastomers, dual mechanical seals | Manufacturer documentation on file | ||
| WS_D4 Series WS3032D4 | Pump | 490 gpm | Cast iron volute, 300-series SS shaft, BUNA-N elastomers, dual mechanical seals | Manufacturer documentation on file | ||
| WS_D4 Series WS3012D4 | Pump | 490 gpm | Cast iron volute, 300-series SS shaft, BUNA-N elastomers, dual mechanical seals | Manufacturer documentation on file | ||
| WS_D4 Series WS5012D4 | Pump | 550 gpm | Cast iron volute, 300-series SS shaft, BUNA-N elastomers, dual mechanical seals | Manufacturer documentation on file | ||
| WS_D4 Series WS5032D4 | Pump | 550 gpm | Cast iron volute, 300-series SS shaft, BUNA-N elastomers, dual mechanical seals | Manufacturer documentation on file | ||
| WS_D4 Series WS3037D4 | Pump | 620 gpm | Cast iron volute, 300-series SS shaft, BUNA-N elastomers, dual mechanical seals | Manufacturer documentation on file | ||
| WS_D4 Series WS7534D4 | Pump | 620 gpm | Cast iron volute, 300-series SS shaft, BUNA-N elastomers, dual mechanical seals | Manufacturer documentation on file | ||
| WS_D4 Series WS7537D4 | Pump | 620 gpm | Cast iron volute, 300-series SS shaft, BUNA-N elastomers, dual mechanical seals | Manufacturer documentation on file | ||
| 320L Series (municipal 316SS tier only -- NOT the residential 320L brochure) 160L30 (and family) | Pump | 316 stainless steel bowls/impellers/shaft, NSF/ANSI 61 Annex G certified | Manufacturer documentation on file |
This table is part of the equipment catalog dataset (CSV and JSON).
Send James your spec
Fluid, concentration, temperature, flow or volume, and where it goes. James replies with a real answer, not a catalog page.
Reviewed by James Riggins, 30+ years specifying water and chemical process equipment · Updated