Skip to main content
LibertyCES — Engineering Line Direct: Call James Riggins at (559) 395-5500 — 30+ Years Spec Experience. No sales queue. Real engineering answers.
Type to search 990+ pagesBrowse everything →
Manufacturers / ResinTech

ResinTech

Ion exchange resin manufactured in Camden, New Jersey — including SBG2-HP, the Type 2 strong-base anion resin LibertyCES specified for a real groundwater uranium-removal treatment system.

Direct answer

ResinTech manufactures ion exchange resin in Camden, New Jersey. SBG2-HP is a Type 2 strong-base anion resin in chloride form, which LibertyCES specified at 35 CF per vessel, a project-specific sizing, for a groundwater uranium-removal system with progressive twin vessels. Regeneration throughput is set conservatively below the resin's stated TENORM accumulation limit.

Product Families

What LibertyCES specifies from ResinTech

ResinTech SBG2 type 2 strong-base anion resin beads
Ion Exchange Resin — SBG2-HP
SBG2-HP

Type 2 strong-base anion resin, chloride (Cl⁻) form — the resin LibertyCES specified for a real groundwater uranium-removal project, sized at 35 CF per vessel for that project’s twin-vessel progressive configuration.

Learn more →
Spec Data

ResinTech — Real Project Spec Data

Product LineModelCategoryMaterial / TypeSize / CapacityNotes
Ion Exchange ResinSBG2-HPIon Exchange ResinType 2 strong-base anion resin (Cl⁻ form)35 CF/vessel (project-specific sizing)n/a

Sourced from a real LibertyCES commissioning project (a California water utility’s groundwater system) — sizing shown is that specific project's engineered sizing, not a universal constant.

FAQ

Frequently Asked Questions

What resin type removes uranium from groundwater via ion exchange?

A strong-base Type 2 anion resin in chloride (Cl⁻) form. Uranium in groundwater at typical pH exists as an anionic uranyl-carbonate complex, not a simple cation, which is why an anion resin removes it rather than a cation softening resin. On a real LibertyCES project (a California water utility’s groundwater system), ResinTech SBG2-HP was specified for exactly this reason.

Why is a progressive (lead/lag) twin-vessel configuration used instead of parallel vessels?

A progressive configuration runs two vessels in sequence so one is always polishing behind the other, which extends time-to-breakthrough for a regulated contaminant like uranium compared to a simple parallel split. This was the configuration used on the real California groundwater uranium project, sized at 35 CF of SBG2-HP resin per vessel.

How is resin TENORM risk managed on a uranium removal system?

By setting the regeneration throughput setpoint at a conservative margin below the resin manufacturer’s stated TENORM (Technologically Enhanced Naturally Occurring Radioactive Material) accumulation limit, rather than relying only on downstream waste characterization after the fact. On the California groundwater uranium project this margin was roughly 5.2x below ResinTech’s stated limit for SBG2-HP.

Related
Uranium / Radionuclide Removal — real California groundwater uranium project design basis →
Spec Review

Get the right resin for your contaminant and water chemistry

Ready to buy or need a fast answer? Call, text, or email James directly — (559) 395-5500 · [email protected].

Free spec review

Send James your spec

Fluid, concentration, temperature, flow or volume, and where it goes. James replies with a real answer, not a catalog page.

Reviewed by James Riggins, 30+ years specifying water and chemical process equipment · Updated