Schurco Slurry USA
Heavy-duty slurry pumps — 7 series spanning 1" to 22" discharge, up to 30,000 gpm and 750 psig, for mining, dredging, and industrial process slurries.
Schurco Slurry USA makes heavy-duty slurry pumps in seven series, spanning 1 to 22 inch discharge, up to 30,000 gpm and 750 psig, for mining, dredging, and industrial process slurries. The H Series is the high-pressure model at 325 ft head, and the V Series is fully cantilevered with no submerged bearings, seals, or packing.
What LibertyCES specifies from Schurco Slurry USA
S Series covers 1"–18" discharge at up to 22,000 gpm; L Series is the highest-volume pump in the catalog at up to 30,000 gpm and 90+% efficiency.
H Series is the clear high-pressure outlier at 750 psig and 325 ft head; V Series is fully cantilevered with no submerged bearings, seals, or packing.
Schurco Slurry USA — Real Catalog Spec Data
| Product Line | Model | Category | Material | Size / Capacity | Temp Rating |
|---|---|---|---|---|---|
| S Series | S Series | Pump | metallic or elastomeric liners | discharge 1-18in, head max 240ft, flow max 22000gpm, working pressure max 300psig | n/a |
| L Series | L Series | Pump | alloy or thick elastomer liners | discharge 4-22in, head max 180ft, flow max 30000gpm, working pressure max 250psig | n/a |
| H Series | H Series | Pump | high-chrome liners | discharge 1-6in, head max 325ft, flow max 3000gpm, working pressure max 750psig | n/a |
| V Series | V Series | Pump | 27% chrome alloy casing (metal) or molded rubber casing (rubber) | discharge 1.5-10in, head max 160ft, flow max 4500gpm | n/a |
| U Series | U Series | Pump | unlined, high-chrome alloy hardened >650 Brinell | discharge 2-10in, head max 240ft, flow max 6000gpm, working pressure max 150psig | n/a |
| Z Series | Z Series | Pump | n/a | discharge 4-14in, head max 225ft, flow max 12000gpm, working pressure max 200psig | n/a |
| P Series | P Series | Pump | wear-resistant alloy wet end | discharge 4-6in, head max 420ft, flow max 2250gpm, working pressure max 240psig, for SG ~1.05 light slurries | n/a |
Sourced from Schurco Slurry USA's own catalog documentation.
Frequently Asked Questions
Which Schurco slurry pump series handles the highest pressure?
The H Series, rated up to 750 psig and 325 ft head — the clear high-pressure outlier in the lineup, though at comparatively low flow (3,000 gpm max), reflecting a precision-vs-throughput tradeoff.
What makes the Schurco V Series different from the other slurry pump series?
It is fully cantilevered with no submerged bearings, seals, or packing — a unique double-suction impeller eliminates shaft seals and reduces thrust load, making it suited to sump, pit, and tank service.
What seal options does Schurco offer across its slurry pump line?
Three shared options: Stuffing Box (packing rings, requires seal water), Expeller (waterless centrifugal seal for moderate suction conditions), and cartridge-style Mechanical Seal for high-pressure, high-temperature, or corrosive/abrasive slurries.
Get the right slurry pump series for your solids content and head
Ready to buy or need a fast answer? Call, text, or email James directly — (559) 395-5500 · [email protected].
Schurco Slurry USA models in the LibertyCES catalog
7 models across 7 product lines. For most models that state them (the middle 80%): flow 3,000–22,000 gpm (681,300–4,996,200 L/h); connection sizes 1–18 in; pressure to 750 psi (51.7 bar). Extremes are in the table.
| Model / line | Type | Size / capacity / flow | Pressure | Temperature | Wetted material | Source |
|---|---|---|---|---|---|---|
| S Series S Series | Pump | 22000 gpm | 300 psi (20.7 bar) | metallic or elastomeric liners | Schurco Slurry USA — Slurry Pumps | |
| L Series L Series | Pump | 30000 gpm | 250 psi (17.2 bar) | alloy or thick elastomer liners | Schurco Slurry USA — Slurry Pumps | |
| H Series H Series | Pump | 3000 gpm | 750 psi (51.7 bar) | high-chrome liners | Schurco Slurry USA — Slurry Pumps | |
| V Series V Series | Pump | 4500 gpm | 27% chrome alloy casing (metal) or molded rubber casing (rubber) | Schurco Slurry USA — Slurry Pumps | ||
| U Series U Series | Pump | 6000 gpm | 150 psi (10.3 bar) | unlined, high-chrome alloy hardened >650 Brinell | Schurco Slurry USA — Slurry Pumps | |
| Z Series Z Series | Pump | 12000 gpm | 200 psi (13.8 bar) | n/a | Schurco Slurry USA — Slurry Pumps | |
| P Series P Series | Pump | 2250 gpm | 240 psi (16.6 bar) | wear-resistant alloy wet end | Schurco Slurry USA — Slurry Pumps |
This table is part of the equipment catalog dataset (CSV and JSON).
Send James your spec
Fluid, concentration, temperature, flow or volume, and where it goes. James replies with a real answer, not a catalog page.
Reviewed by James Riggins, 30+ years specifying water and chemical process equipment · Updated