Strainer for Plating
30+ years spec experience. Send James the process data and get a real answer — not a catalog page.
Request a Spec Review →Yes. LibertyCES has documented Strainer in Plating applications, including Filter Pump CB Bag Filter. The right model depends on the fluid, concentration, temperature, flow and duty cycle, so send James your process data for a free spec review before final selection.
Notes from the vendor documentation
Bag filtration for plating/surface finishing process solutions.
Products cited in this application
Real Specifications
| Spec | Value | Source document |
|---|---|---|
| CB Bag Filter pressure rating | up to 100 psi at ambient temperature | Filter Pump — Full Product Line |
| CB Bag Filter construction | CPVC body with FKM elastomers, no lucite/glass, no metal-to-liquid contact | Filter Pump — Full Product Line |
| CBK Bag Chamber flow capacity | flow to 100 GPM (sizes #1 and #2) | Filter Pump — Full Product Line |
CB Bag Filter's double O-ring labyrinth seal and long-sleeved flanges are what enable its 100 psi at ambient rating — a lighter single-seal bag housing substituted in on a pressurized plating rinse loop won't hold that same rating.
Plating bath strainers can't have any metal-to-liquid contact without risking bath contamination — Filter Pump's CB/CBK bag line is built entirely in CPVC and FKM specifically so the filtration step doesn't become a new source of metal ions in a precious-metal or chrome bath.
Every claim on this page traces to real, vendor-published documentation on file with LibertyCES. Confirm current specifications with the manufacturer before final specification.
Related Guides
FAQ
How is Strainer used in Plating?
Bag filtration for plating/surface finishing process solutions.
Which Strainer models are specified for Plating?
Documented models include Filter Pump CB Bag Filter. Confirm current specifications with the manufacturer before final selection.
What does LibertyCES need to size Strainer for a Plating application?
The fluid and its concentration, operating temperature, flow or volume, pressure and suction conditions, duty cycle, and the existing equipment it replaces or connects to. James reviews it for free.
Ready to buy or need a fast answer? Call, text, or email James directly — (559) 395-5500 · [email protected].
Send James your spec
Fluid, concentration, temperature, flow or volume, and where it goes. James replies with a real answer, not a catalog page.
Reviewed by James Riggins, 30+ years specifying water and chemical process equipment · Updated