Flow Meter for Oil & Gas
30+ years spec experience. Send James the process data and get a real answer — not a catalog page.
Request a Spec Review →Yes. LibertyCES has documented Flow Meter in Oil & Gas applications, including Badger Meter. The right model depends on the fluid, concentration, temperature, flow and duty cycle, so send James your process data for a free spec review before final selection.
Notes from the vendor documentation
Upstream oil & gas and hydraulic fracturing explicitly named sectors.
Products cited in this application
Real Specifications
| Spec | Value | Source document |
|---|---|---|
| Blancett Model 1100 envelope | -150°F to 425°F, up to 5,000 PSI | Badger Meter — Flow Measurement |
| Blancett named applications | Hydraulic fracturing and mining, upstream oil & gas, petrochemical | Badger Meter — Flow Measurement |
| Blancett display heads | B3100/B3000/B2900 are separate electronic flow-monitor/display heads, not primary flow elements | Badger Meter — Flow Measurement |
Upstream oil & gas and hydraulic fracturing flow lines run pressure and temperature swings most process water never sees — Badger Meter's Blancett Model 1100 turbine meter is rated to -150°F to 425°F and 5,000 PSI specifically for that duty, which is why a frac-water flow meter isn't interchangeable with a municipal water flow meter even though both measure the same physical quantity.
Every claim on this page traces to real, vendor-published documentation on file with LibertyCES. Confirm current specifications with the manufacturer before final specification.
FAQ
How is Flow Meter used in Oil & Gas?
Upstream oil & gas and hydraulic fracturing explicitly named sectors.
Which Flow Meter models are specified for Oil & Gas?
Documented models include Badger Meter. Confirm current specifications with the manufacturer before final selection.
What does LibertyCES need to size Flow Meter for a Oil & Gas application?
The fluid and its concentration, operating temperature, flow or volume, pressure and suction conditions, duty cycle, and the existing equipment it replaces or connects to. James reviews it for free.
Ready to buy or need a fast answer? Call, text, or email James directly — (559) 395-5500 · [email protected].
Send James your spec
Fluid, concentration, temperature, flow or volume, and where it goes. James replies with a real answer, not a catalog page.
Reviewed by James Riggins, 30+ years specifying water and chemical process equipment · Updated