Flow Meter for Plating
30+ years spec experience. Send James the process data and get a real answer — not a catalog page.
Request a Spec Review →Yes. LibertyCES has documented Flow Meter in Plating applications, including Icon TI/TK Series. The right model depends on the fluid, concentration, temperature, flow and duty cycle, so send James your process data for a free spec review before final selection.
Notes from the vendor documentation
Plating explicitly named application sector.
Products cited in this application
Real Specifications
| Spec | Value | Source document |
|---|---|---|
| Icon TI accuracy | ±0.5% | Icon Process Controls — Flow Meters + Process Displays |
| Icon TI body materials | PVC | PP | PVDF | 316SS | Icon Process Controls — Flow Meters + Process Displays |
| Icon TI size range | 1/2"-24" | Icon Process Controls — Flow Meters + Process Displays |
| Icon TI wetted rotor | Zirconium Ceramic rotor/bearings, ETFE Tefzel paddle | Icon Process Controls — Flow Meters + Process Displays |
Icon's TI paddlewheel retrofits into existing fittings without replacing piping — a real install-time advantage on an active plating line where a full shutdown to swap a flow meter isn't an option.
Plating lines run flow meters in direct contact with chrome, cyanide, and acid rinse streams — Icon's TI Series covers that with a PVC/PP/PVDF/316SS body option and a Zirconium Ceramic/ETFE Tefzel wetted rotor, backed by a lifetime warranty, so a plating shop isn't choosing between corrosion resistance and accuracy.
Every claim on this page traces to real, vendor-published documentation on file with LibertyCES. Confirm current specifications with the manufacturer before final specification.
FAQ
How is Flow Meter used in Plating?
Plating explicitly named application sector.
Which Flow Meter models are specified for Plating?
Documented models include Icon TI/TK Series. Confirm current specifications with the manufacturer before final selection.
What does LibertyCES need to size Flow Meter for a Plating application?
The fluid and its concentration, operating temperature, flow or volume, pressure and suction conditions, duty cycle, and the existing equipment it replaces or connects to. James reviews it for free.
Ready to buy or need a fast answer? Call, text, or email James directly — (559) 395-5500 · [email protected].
Send James your spec
Fluid, concentration, temperature, flow or volume, and where it goes. James replies with a real answer, not a catalog page.
Reviewed by James Riggins, 30+ years specifying water and chemical process equipment · Updated