General Industrial Assembly & MRO: Sealant and Adhesive Supply Systems
Bulk sealant and adhesive supply pumps, warm-melt systems, and dispense hardware for general assembly and MRO lines — the widest fluid-compatibility catalog in the LibertyCES equipment corpus, sourced to Graco's own SKU tables.
Named General Industry SKUs, Not an Inferred Fit
Most sector pages in this catalog infer relevance from a vendor's application list. This one is different: Graco's Dura-Flo family carries real part numbers Graco itself labels as General Industry supply units — 25A669, 25A667, 25A653, 25A695, 25A700, at 40:1 and 61:1 ratios in 20L drums. PR-X and PR-Xv, Graco's proportioning line, name general industry directly in their published target-market list alongside electronics and EV battery. Everything below is drawn from Graco's own catalog documentation — real SKU counts, real ratios, real wear-feature claims — not a generic MRO sourcing pitch.
Check-Mate: 112 SKUs, the Widest Fluid List in the Catalog
Configured across ratio (e.g. 61:1, 20:1), container size (S20 20L, D200/D200s 200L), and carbon-versus-stainless-steel construction — stainless specifically for waterborne-fluid compatibility, a real material-selection axis rather than a premium upsell.
| Example SKU | Construction | Configuration Axis | Lower Options |
|---|---|---|---|
| RCMNN79 / RCMNN5A / RCMNN59 | Carbon steel | Ratio × container (S20/D200/D200s) | 60cc / 100cc / 200cc |
| RCM9F5A / RCM9F59 / RCM9F3F | Carbon steel | Ratio × container | 250cc / 500cc |
| RCM9C5A / RCM9C59 | Carbon steel | Ratio × container | 100cc / 200cc |
| RCM9A5A / RCM9A3B | Carbon steel | Ratio × container | 60cc / 100cc |
| RCM7F59 / RCM7C5A | Carbon steel | Ratio × container | 100cc / 200cc |
112 total SKUs across the full ratio × container × construction matrix. Fluid list: sealants, adhesives, silicones, epoxies, acrylics, urethanes, inks, mastics, lubricants, butyls, PVC sealers, caulking compounds. Manuals 3A8564EN-E, 312376EN, 312375EN-R, 313526EN, 338921EN. Sourced from Graco's own catalog documentation.
Dura-Flo: 48 SKUs, Including Graco's Own General Industry Part Numbers
| SKU | Ratio | Container | Notes |
|---|---|---|---|
| 25A669 / 25A667 / 25A653 / 25A695 / 25A700 | 40:1 and 61:1 | 20L | Graco's own "General Industry supply unit" branded SKUs |
| RGDG959 | 10:1 | D200 | — |
| RGDFG59 / RGDF959 | 22:1 | D200 | — |
| RGDF559 | 12:1 | D200 | — |
| RGDEM78 / RGDEL79 | 47:1 | D200s | — |
| RGDEG4F | 32:1 | D60 | — |
| RGDCA59 | 57:1 | D200 | — |
| RGDB54F | 41:1 | D60 | — |
| P15CSS | 15:1 | 430cc | NXT 34000 air motor, severe-duty carbon steel |
48 total SKUs across ratio × drum size (D200/D200s 200L, D60/D20 20L, S20 20L). Real wear features: 2-ball piston positive displacement, quick-disconnect coupler, stainless-steel chrome rod Graco claims at 3x+ life vs. standard chrome SST, manually adjustable wet cup, cartridge packings, high-volume piston. Manual 344905EN.
Therm-O-Flow: 16 SKUs Across Eight Configuration Dimensions
Real configurable dimensions: ratio (36:1 or 68:1) × pump (Check-Mate MaxLife or Severe Duty) × state (Ambient or Heated) × container (5gal/20L, 16gal/60L, 55gal/200L) × platen (Carbon Steel or Aluminum) × seal (PTFE Nitrile or EPDM) × voltage (240V or 480V) × ADM presence. Up to 32 heat zones with 2 expansion kits.
| Example SKUs |
|---|
| WMC73C2, WMC82G2, WMC52F2, WMC21B1, WMC21B2, WMC63G1, WMC63G2, WMC63G3, WMC21D1, WMC22G1, WMC83G2, WMC61B1, WMC62G1, WMC62G2, WMC81D1 — plus WMC53C2 (Graco's own ram-system reference photo configuration) |
16 total SKUs. Manuals 3A8005EN, 350422EN-B.
Precision Metering, Small-Batch, and Quote-to-Spec
PCF — Precision Continuous Flow Metering
PF2120, PF2200, PF2220, PF2300, PF2320, PF2340, PF2400, PF2420, PF2440, PF2500, PF2520, PF2540 — across regulator (Cartridge / Mastic / Heated Mastic) × meter (No Meter / Standard / High Resolution) × interface (Discrete / EtherNet/IP / PROFINET). Closed-loop, no shot-size limitation, 100–240 VAC, 16 programmable applicator styles.
DynaMite — Cartridge / Pail Mini-Extruder
DM-22 Mini-Extruder for 1-gallon pails (Part# 2007873); Supply Pump for 600cc cartridges (Part# 25T472); DynaMite 190 single-component mini-extruder, 1 quart–1 gallon (Part# 235871). NXT air motor powered — the small-batch/MRO end of the supply-pump ladder below Check-Mate and Dura-Flo.
E-Flo SP — Electric Supply Pump
Configurator-only, no published SKU table — the honest answer when an application falls outside the fixed Check-Mate/Dura-Flo matrices. Electric-driven (no compressed air), quiet motor, real-time flow control, PLC integration, ambient/warm/hot-melt conditioning up to 400°F.
10 Discrete Part Numbers Plus a 63-SKU Hose Family
| Part # | Description |
|---|---|
| 243700 | 230V heated fluid pressure regulator |
| 224040 | AirGard 3/4in NPT pump runaway valve |
| 244734 | Air-operated high-pressure regulator, EZ Flush gauge port |
| 246687 / 244740 / 246642 | Air-operated mastic regulators |
| 961635 | 5000 psi mastic regulator |
| 248090 | Air-operated fluid pressure regulator |
| 903958 | Spring-operated mastic regulator |
| 204355 | Palm-grip extrusion gun |
| InvisiPac No. 6 fluid hoses (63 SKUs) | 0.308in / 7.082mm ID, Heated and Water-Wash — e.g. 126389 (10ft heated), 126483 (20ft), 126534 (25ft), 127401 (4ft), 24U763–24U776 (4ft–25ft water-wash) |
10 complete discrete regulator/gun SKUs plus the 63-SKU InvisiPac hose family. No per-product manuals listed on the Meters & Regulators page (manuals live on individual product detail pages) — recorded honestly rather than invented. Hose manuals 332072EN-T, 3A4937EN-G. Sourced from Graco's own catalog documentation.
Frequently Asked Questions
What evidence is there that Graco builds specifically for general industrial supply?
Graco's own Dura-Flo line lists real "General Industry supply unit" part numbers — 25A669, 25A667, 25A653, 25A695, 25A700 (40:1 and 61:1 ratios, 20L drums) — a literal manufacturer SKU naming, not an inferred fit. Graco's PR-X/PR-Xv proportioning line also names general industry directly in its published target-market list.
What fluids does Check-Mate actually cover?
Per Graco's own catalog documentation, the Check-Mate family covers sealants, adhesives, silicones, epoxies, acrylics, urethanes, inks, mastics, lubricants, butyls, PVC sealers, and caulking compounds — the widest fluid list of any supply-pump family in the LibertyCES catalog corpus.
What's the real difference between Check-Mate and Dura-Flo?
Check-Mate is the larger catalog (112 SKUs) spanning ratio, container size, and carbon-versus-stainless construction, with stainless specifically for waterborne-compatible fluids. Dura-Flo (48 SKUs) is built around documented wear features — a 2-ball piston, a stainless chrome rod Graco claims at 3x+ life versus standard chrome SST, an adjustable wet cup, and cartridge packings — and it's the family carrying Graco's own general-industry-branded SKUs.
What if my application doesn't match a published Check-Mate or Dura-Flo SKU?
Graco's E-Flo SP electric supply pump is a configurator/quote-to-spec product with no published SKU table — the honest answer for an application outside the fixed matrices below, not a catalog gap. Electric-driven, quiet operation, real-time flow control, and PLC integration up to 400°F conditioning are the quotable spec anchors; LibertyCES specs it to the actual duty rather than forcing a fixed-SKU fit.
Specifying a sealant or adhesive supply system?
Send LibertyCES the fluid, ratio, container size, and duty — we'll confirm the exact Check-Mate, Dura-Flo, or Therm-O-Flow configuration before you spec a model.
Ready to buy or need a fast answer? Call, text, or email James directly — (559) 395-5500 · [email protected].