Skip to main content
LibertyCES — Engineering Line Direct: Call James Riggins at (559) 395-5500 — 30+ Years Spec Experience. No sales queue. Real engineering answers.
Type to search 990+ pagesBrowse everything →
Manufacturers / Cornell Pump

Cornell Pump

Submersible and solids-handling centrifugal pumps for abrasive, high-flow, high-head municipal and industrial wastewater service — heavy-walled volute construction up to 20,000 GPM and 450 ft head.

Direct answer

Cornell Pump Company, founded in 1946 in Portland, OR, makes submersible and heavy-walled solids-handling centrifugal pumps for abrasive, high-flow, high-head municipal and industrial wastewater service. Published ranges reach 20,000 GPM, 450 ft head, and 3 to 5 inch solids. Curves should be confirmed against the duty point. It is available through E-Water Solutions.

Product Families

What LibertyCES specifies from Cornell Pump

Cornell Pump Company was founded in 1946 in Portland, OR and has been a division of Roper Industries since 1968. It is best known for "Efficient by Design" centrifugal pump engineering, including submersible and heavy-duty solids-handling lines built for abrasive slurry and wastewater service. LibertyCES reaches Cornell Pump through E-Water Solutions, LLC — its existing Southern California pump distribution partner, which names Cornell Pump directly on its own line card.

Cornell Pump Company submersible pump, official Cornell Pump product photo
Submersible Pumps
Enclosed & delta impeller options

Continuously-submerged electric-motor submersible pumps, heavy-duty volute construction for abrasive service, up to 3in solids, published range to 20,000 GPM and 450 ft head.

Learn more →
Cornell Pump Company solids-handling pump, official Cornell Pump product photo
Solids Handling Pumps
Heavy-walled volute family (incl. model 4NHTB)

Heavy-walled volutes for abrasive slurry/wastewater service, 3in-5in solids capacity, published range 80-20,000 GPM and 10-350 ft head.

Learn more →
Spec Data

Cornell Pump — Real Catalog Spec Data

Product LineModelCategoryConstructionSolids CapacityFlow / Head Range
Submersible Pumpsenclosed / delta impeller optionsSubmersible Pumpheavy-duty volute, electric motorup to 3inup to 20,000 GPM, up to 450 ft head
Solids Handling Pumpsgeneric family (incl. 4NHTB, unconfirmed sheet)Solids Handling Pumpheavy-walled volute, abrasive service3in-5in80-20,000 GPM, 10-350 ft head

Sourced from Cornell Pump Company's own published pages (cornellpump.com/submersible-pumps/, cornellpump.com/solids-handling-pumps/). Model 4NHTB was read visually off Cornell's own printed performance-curve chart (BR-SUBMERSIBLE-2023.pdf) — plotting through roughly 250 GPM at approximately 270-380 ft TDH — and is a real lead, not yet a certified spec; a real project still needs the actual curve sheet or rep confirmation before final quoting.

FAQ

Frequently Asked Questions

What's the duty range for Cornell Pump's submersible and solids-handling lines?

Cornell's own site publishes submersible pumps up to 3in solids, 20,000 GPM flow, and 450 ft head (enclosed and delta impeller options), with the broader solids-handling family covering 80-20,000 GPM and 10-350 ft head using heavy-walled volutes for abrasive service, 3in-5in solids capacity.

Is a specific Cornell model confirmed for LibertyCES duty points?

One real lead exists: model 4NHTB, read visually off Cornell's own published performance-curve chart (BR-SUBMERSIBLE-2023.pdf), plots through roughly 250 GPM at approximately 270-380 ft TDH. This is not yet a certified performance curve sheet — a real project would still need the actual 4NHTB curve sheet or rep confirmation from E-Water Solutions before final quoting.

Is Cornell or Barnes the better fit for high-head municipal sewage duty?

Cornell's published overall range extends further on paper than Barnes' confirmed 18/21 Frame data (up to 20,000 GPM and 450 ft head vs. Barnes' verified 2-30 HP range). But Cornell's specific model data (4NHTB) is a curve-chart read, not a certified sheet, while Barnes' 18/21 Frame specs come from real installation manuals. Send James your duty point and he'll confirm which line E-Water Solutions can actually quote against it.

Related

Related Manufacturers & Industries

E-Water Solutions →Barnes →Municipal Wastewater →
Spec Review

Get the right model and confirmed curve for your duty point

Ready to buy or need a fast answer? Call, text, or email James directly — (559) 395-5500 · [email protected].

Free spec review

Send James your spec

Fluid, concentration, temperature, flow or volume, and where it goes. James replies with a real answer, not a catalog page.

Reviewed by James Riggins, 30+ years specifying water and chemical process equipment · Updated