Parts lists / Graco
Graco E-Flo SP Supply Systems: parts list
56 part numbers as printed in Graco manual 3A6331P.
Direct answer
This page lists the 56 parts printed in Graco manual 3A6331P for the E-Flo SP Supply Systems, each with its reference number, part number, description and quantity, and the manual page it comes from. Confirm every part number against the current manual and your pump's model number before ordering.
Parts
E-Flo SP Supply Systems: part numbers and descriptions
56 parts
| Part number | Description | Ref | Qty | Manual page |
|---|---|---|---|---|
| 15V954 | LABEL, valve, shutoff, air control | 104 | 1 | 38 |
| 121112 | SCREW, cap, socket head | 108 | 12 | 38 |
| 255633 | BRACKET, pendant pivot, | 112 | 1 | 38 |
| 121253 | KNOB, display adj., ram pkgs | 113 | 1 | 38 |
| 16A314 | BRACKET, mounting, acc. box | 225 | 1 | 38 |
| 24C264 | CONTROL, air, ram, hyd driver | 115 | 1 | 38 |
| 25E207 | JUNCTION BOX, ram mounted, | 116 | 1 | 38 |
| 130787 | SENSOR, barrel, m18 x 1, pnp, nc | 130 | 1 | 38 |
| 123656 | CABLE, spin, male/female | 131 | 1 | 38 |
| 255381 | ACTUATOR, sensor, low/empty, | 132 | 1 | 38 |
| 17Y702 | BRACKET, lvl sensor, dual, d200, | 133 | 1 | 38 |
| 127510 | RING, retaining, internal | 218* | 2 | 40 |
| 255296 | BRACKET, mounted, painted | 221 | 1 | 40 |
| 15W703 | BRACKET, mounting, btm | 224 | 1 | 40 |
| 16A566 | BRACKET, mounting, ram | 226 | 1 | 40 |
| 121259 | BEARING, ram end cap | 238* | 1 | 40 |
| 255639 | BRACKET, mounting, assembly | 114 | 1 | 40 |
| 15F453 | RETAINER, retaining ring | 241* | 1 | 40 |
| 15M295 | BEARING, ram end cap | 242 | 1 | 40 |
| 15U979 | PIN, spring, straight | 243 | 1 | 40 |
| 160138 | SPRING, compression | 244* | 1 | 40 |
| 160258 | PACKING, o-ring, buna-n | 245* | 2 | 40 |
| 104395 | WASHER, lock, tooth, external | 254 | 2 | 40 |
| 17L703 | BRACKET, shelf, D60, 3400/6500 | 259 | 1 | 40 |
| 17X806 | BRACKET, cable track, D60 ram | 260 | 1 | 40 |
| 17Y702 | BRACKET, lvl sensor, dual, D200, | 133 | 1 | 40 |
| 16A566 | BRACKET, mounting, ram, 3 in. | 501* | 2 | 44 |
| 17D989 | CONNECTOR, conduit, liquid-tight | 513 | 1 | 44 |
| 17D987 | CONNECTOR, conduit, liquid-tight | 515 | 1 | 44 |
| 16K918 | LABEL, power in, branch circuit | 517 | 1 | 44 |
| 124436 | CONNECTOR, splice, wire | 521 | 2 | 44 |
| 065388 | WIRE, copper, electric | 523 | 1 | 44 |
| 124443 | TERMINAL, ring, insulated, 1/4 | 524 | 1 | 44 |
| 128986 | CONNECTOR, 2 conductor, leverlock | 802 | 2 | 45 |
| 121003 | CABLE, can, female / female 3.0 m | 804 | 2 | 45 |
| 128177 | INSERT, rubber, cord grip, 4 x 6 mm | 808 | 1 | 45 |
| 128397 | INSERT, rubber, cord grip, 9-10 mm | 809 | 1 | 45 |
| 128670 | BOLT, flange hd, serrated, m5, sst | 816 | 4 | 45 |
| 17L889 | SEAL, wiper, drum, 55 gal., EPDM | 408† | 1 | 46 |
| 162230 | SEAL, wiper, drum, 55 gal., EPDM | 409† | 1 | 46 |
| 17E556 | FITTING, PTC, elbow,1/4 NPT, 1/4 | 417 | 1 | 46 |
| 555413 | NUT, (For SST platens) | 459 | 12 | 51 |
| 257697 | HANDLE, bleed, sst | 461 | 1 | 51 |
| 109482 | O-RING; see page | 463 | 52 | 51 |
| C20487 | FITTING, nipple, hex (25E618 only) | 601 | 1 | 59 |
| 132019 | FITTING, tee, 3/4 npt (25E618 only) | 602 | 1 | 59 |
| 15B556 | FITTING, adapter, 1/4 npt x 3/4 npt | 604 | 1 | 59 |
| 156648 | ADAPTER, swivel, straight (25E618 | 605 | 1 | 59 |
| 25R844 | VALVE, 25, npt/b,000rm,amb,5k | 607 | 1 | 59 |
| 255722 | HOSE, coupled, hp (25E618 only) | 609 | 1 | 59 |
| 114151 | FITTING, elbow, male, swivel | 624 | 2 | 59 |
| C19652 | FITTING, bushing, reducing | 707 | 2 | 63 |
| 121163 | FITTING, cross, 1” npt | 713 | 2 | 63 |
| 131526 | FITTING, nipple, 1” npt, cs | 714 | 6 | 63 |
| 16U440 | ADAPTER, fitting, pressure sensor | 723 | 2 | 63 |
| 15M669 | SENSOR, pressure, fluid outlet | 724 | 2 | 63 |
Source: Graco manual 3A6331P (E-Flo SP Supply Systems). Part numbers can change between revisions; this list reflects the revision LibertyCES has on file.
Related
Free spec review
Send James your spec
Fluid, concentration, temperature, flow or volume, and where it goes. James replies with a real answer, not a catalog page.
Reviewed by James Riggins, 30+ years specifying water and chemical process equipment · Updated