Graco InvisiPac GS35 Plug-Free Hot Melt Applicator: parts list
26 part numbers as printed in Graco manual 3A2805N.
This page lists the 26 parts printed in Graco manual 3A2805N for the InvisiPac GS35 Plug-Free Hot Melt Applicator, each with its reference number, part number, description and quantity, and the manual page it comes from. Confirm every part number against the current manual and your pump's model number before ordering.
InvisiPac GS35 Plug-Free Hot Melt Applicator: part numbers and descriptions
26 parts
| Part number | Description | Ref | Qty | Manual page |
|---|---|---|---|---|
| 117030 | SCREW, shcs M6 x | 13 | 40 | 27 |
| 24R231 | TUBE, applicator, hotmelt, open | 7 | 1 | 32 |
| 124736 | SCREW, set, cup, m4 x.7x4 mm, sst | 8 | 1 | 32 |
| 24P276 | INSULATOR, clamp, bar, housing | 10 | 1 | 32 |
| 24V795 | HEATER, 240 VAC, 200W, 1/2 dia. x 1.5 | 3 | 1 | 35 |
| 16P769 | TUBE, applicator, hotmelt, open | 7 | 1 | 35 |
| 124736 | SCREW, set, cup, M4 x 0.7 x 4 mm, sst | 8 | 1 | 35 |
| 24P239 | VALVE, solenoid, 3 way, sr, 24 VDC | 9* | 1 | 35 |
| 24P615 | FITTING, adapter, JIC 06 x SAE 06, mm, | 14 | 1 | 35 |
| 24P275 | FILTER, gun, 80 mesh (3–pack: 24P802) | 16 | 1 | 35 |
| 24W087 | CORD SET, 240V, applicator, Pt 100 ohm | 17a | 1 | 35 |
| 24P547 | FITTING, elbow, JIC06 x SAE06, mm, cs | 34 | 1 | 35 |
| 24P548 | FITTING, elbow, 45, JIC06 x SAE06, mm, | 35 | 1 | 35 |
| 24V795 | HEATER, 240 VAC, 200W, 1/2 dia x 1.5 in. | 3 | 1 | 37 |
| 117029 | SCREW, shcs, M6 x | 13 | 25 | 37 |
| 24P615 | FITTING, adapter, JIC06 x SAE06, mm, cs | 14 | 1 | 37 |
| 24P548 | FITTING, elbow, 45, JIC06 x SAE06, mm, c | 35 | 1 | 37 |
| 126407 | VALVE, solenoid, 3 way, sr, | 9* | 24 | 41 |
| 18F787 | MUFFLER, 1/4 npt, pp | 104 | 1 | 43 |
| 121140 | FITTING, straight, 3/8 | 105 | 1 | 43 |
| 24R942 | CONNECTOR, 24 VDC; | 106 | 1 | 43 |
| 100113 | CONNECTOR, male | 102 | 1 | 43 |
| 24P900 | BUSHING, 1/4 npt x 1/8 | 103 | 1 | 43 |
| 24P276 | INSULATOR, clamp, bar, | 10 | 1 | 45 |
| 108050 | WASHER, lock, spring | 12 | 2 | 45 |
| 117030 | SCREW, shcs, M6 x | 13 | 40 | 45 |
Source: Graco manual 3A2805N (InvisiPac GS35 Plug-Free Hot Melt Applicator). Part numbers can change between revisions; this list reflects the revision LibertyCES has on file.
Related
Send James your spec
Fluid, concentration, temperature, flow or volume, and where it goes. James replies with a real answer, not a catalog page.
Reviewed by James Riggins, 30+ years specifying water and chemical process equipment · Updated