Graco InvisiPac HM25 and HM50 Tank-Free Hot Melt Delivery System: parts list
48 part numbers as printed in Graco manual 333347ZAC.
This page lists the 48 parts printed in Graco manual 333347ZAC for the InvisiPac HM25 and HM50 Tank-Free Hot Melt Delivery System, each with its reference number, part number, description and quantity, and the manual page it comes from. Confirm every part number against the current manual and your pump's model number before ordering.
InvisiPac HM25 and HM50 Tank-Free Hot Melt Delivery System: part numbers and descriptions
48 parts
| Part number | Description | Ref | Qty | Manual page |
|---|---|---|---|---|
| 115942 | NUT, hex, flange head | 3 | 8 | 95 |
| 120753 | FITTING, push to connect | 24 | 2 | 95 |
| 598095 | TUBE, 5/32 OD, nylon | 35 | 4 | 95 |
| 123554 | COUPLER, 3/8 in. OD tubing | 57 | 1 | 96 |
| 121487 | GROMMET, sheet metal, 3/4 | 63 | 2 | 96 |
| 198177 | FITTING, push, straight | 78 | 1 | 96 |
| 123986 | FITTING, elbow, 3/8 OD tube | 83 | 1 | 97 |
| 127666 | CABLE, gca, m12-5p | 86 | 1 | 97 |
| 120858 | BUSHING, strain relief, m40 thread | 106 | 1 | 100 |
| 120859 | NUT, strain relief, m40 thread | 107 | 1 | 100 |
| 121141 | FITTING, elbow, swivel, 3/8t 1/4mnpt | 109 | 1 | 100 |
| 125856 | SCREW, 8-32, serrated flange | 114 | 12 | 100 |
| 127768 | CABLE, can, female/female 1.5 m | 123 | 1 | 100 |
| 119865 | SCREW, mach, hex serrated, 1/4 | 157 | 6 | 102 |
| 110298 | SCREW, cap, sch, 1/4 x 7/8 in.; HM50 | 259 | 4 | 104 |
| 115814 | WASHER, flat, sst; HM50 only | 268 | 4 | 104 |
| 103610 | O-RING, | 270 | 014 | 104 |
| 25C446 | HEATER, rod, 1000 watts; HM50 | 271 | 1 | 104 |
| 24V558 | MOTOR, double ended, air; see page | 218 | 1 | 104 |
| 25A895 | HM25 Outlet Manifold 203, 206, 271, 247, | 1 | 252 | 104 |
| 126474 | FITTING, push to connect | 613 | 1 | 107 |
| 126901 | SCREW, #10-16, thread forming | 708 | 5 | 108 |
| 110932 | FITTING, connector, air | 709 | 1 | 108 |
| 17A492 | BRACKET, funnel, mounting, HM25 | 82 | 1 | 108 |
| 113161 | SCREW, flange, hex hd | 8 | 2 | 109 |
| 24R041 | Kit, Level Sensor | 5 | 1 | 111 |
| 24P852 | Kit, Repair, Pump | 6 | 1 | 111 |
| 24R042 | Kit, Board, Daught. | 8 | 1 | 111 |
| 24R885 | Kit, Cycle Switch | 9 | 1 | 111 |
| 24V510 | Kit, MZLP w/ fuses | 10 | 1 | 111 |
| 24R037 | Kit, 1.5kW Heat Rod | 13 | 1 | 111 |
| 24R034 | Kit, 500W Heat Rod | 14 | 1 | 111 |
| 126453 | Power Supply, 24V | 15 | 1 | 111 |
| 24R040 | Kit, Harness, RTD | 16 | 1 | 111 |
| 25C448 | Kit, Heat Rod Base, 1500W | 18 | 1 | 111 |
| 24W595 | Kit, Filter Rebuild | 2 | 2 | 111 |
| 24X967 | Filter, Air, Repair | 3 | 2 | 111 |
| 24P802 | Kit, Gun Filter, 80 Mesh, 3pk | 5 | 4 | 111 |
| 24P856 | Kit, Valve, Discharge | 1 | 1 | 111 |
| 25C445 | Kit, Heat Rod, 1000W | 13 | 1 | 111 |
| 25C449 | Kit, Heat Rod, HM50 Melt, 1500W | 14 | 1 | 111 |
| 25C446 | Kit, Pump Heat Rod, 1000W | 18 | 1 | 111 |
| 16T779 | RESTRICTOR, air, 0.0225 in. orifice | 8 | 1 | 113 |
| 598095 | TUBE, 5/32 in. OD, nylon; 3 ft (1 m) | 9 | 1 | 113 |
| C20467 | FITTING, nipple, reducing; 1/8-27 npt x | 13 | 1 | 113 |
| 127922 | FITTING, 3/8 npt(m) x M18(f) | 1 | 1 | 125 |
| 127923 | FITTING, 1/4 npt(m) x 10 mm | 2 | 1 | 125 |
| 127924 | FITTING, 1/4 npt(m) x 10 mm | 3 | 1 | 125 |
Source: Graco manual 333347ZAC (InvisiPac HM25 and HM50 Tank-Free Hot Melt Delivery System). Part numbers can change between revisions; this list reflects the revision LibertyCES has on file.
Related
Send James your spec
Fluid, concentration, temperature, flow or volume, and where it goes. James replies with a real answer, not a catalog page.
Reviewed by James Riggins, 30+ years specifying water and chemical process equipment · Updated