Parts lists / Graco
Graco Therm-O-Flow Warm Melt: parts list
45 part numbers as printed in Graco manual 3A8005J.
Direct answer
This page lists the 45 parts printed in Graco manual 3A8005J for the Therm-O-Flow Warm Melt, each with its reference number, part number, description and quantity, and the manual page it comes from. Confirm every part number against the current manual and your pump's model number before ordering.
Parts
Therm-O-Flow Warm Melt: part numbers and descriptions
45 parts
| Part number | Description | Ref | Qty | Manual page |
|---|---|---|---|---|
| 101533 | WASHER, spring lock | 124 | 2 | 117 |
| 15J991 | ADAPTER, lift ring | 127 | 1 | 117 |
| 15J993 | RING, lift, plate | 128 | 1 | 117 |
| C32405 | PISTON, elevator air | 141 | 2 | 117 |
| C02073 | PACKING, quad ring | 142* | 2 | 117 |
| 234966 | KIT, accessory, hose hanger | 267 | 1 | 119 |
| 121235 | SOLENOID, air motor, ram pkg | 301 | 1 | 119 |
| 15J075 | LABEL, safety, hot surface | 304 | 1 | 119 |
| 127510 | RING, retaining, internal | 218* | 2 | 119 |
| 255296 | BRACKET, mounted, painted | 221 | 1 | 119 |
| 15F453 | RETAINER, retaining ring | 241* | 1 | 119 |
| 26B203 | BRACKET, hose, spring | 268 | 1 | 121 |
| 255650 | CONTROL, air, ram, hyd driver | 115 | 1 | 121 |
| 15F674 | LABEL, safety, motor | 321 | 1 | 121 |
| 160258 | PACKING, o-ring, buna-n | 245* | 2 | 121 |
| 104395 | WASHER, lock, tooth, external | 254 | 2 | 121 |
| 15J991 | ADAPTER, lift, ring | 407 | 1 | 122 |
| 15M298 | ROD, tie bar, shelf | 421 | 2 | 124 |
| 101533 | WASHER, lock | 422 | 4 | 124 |
| 100133 | WASHER, lock | 425 | 4 | 124 |
| 26B438 | KIT, repair, AMZ, TOF warm melt | 432 | 1 | 125 |
| 111307 | WASHER, lock, external | 481 | 2 | 126 |
| 108050 | WASHER, lock, spring | 478* | 4 | 126 |
| 257697 | HANDLE, bleed assy | 491 | 1 | 128 |
| C20350 | FITTING, tube, quick disconnect | 495 | 1 | 128 |
| 128670 | BOLD FLANGE HD, serrated | 506 | 8 | 129 |
| 25R653 | HARNESS, heat, wiper, 5 gallon | 534 | 1 | 131 |
| 100840 | FITTING, elbow, street | 551 | 1 | 131 |
| 121310 | FITTING, connector, NPT x JIC | 552 | 1 | 131 |
| 103181 | WASHER, lock external | 539 | 2 | 131 |
| 257697 | HANDLE, bleed, SST, assembly | 555 | 1 | 131 |
| 123140 | FITTING, cap, 1/2 JIC, CS | 556 | 1 | 131 |
| 257683 | KIT, wiper, PE support | 569 | 1 | 133 |
| 25R653 | HARNESS, heat, wiper, 5 gal | 564 | 1 | 133 |
| 257685 | KIT, clamp, retaining | 573 | 1 | 133 |
| C20350 | FITTING, elbow 90 deg | 550 | 1 | 133 |
| 15B137 | SWITCH, over temperature | 567 | 1 | 133 |
| 123140 | FITTING, CAP, 1/2 JIC, cs | 556 | 1 | 133 |
| 257685 | HANDLE, bleed, sst, assy | 576 | 1 | 133 |
| 100018 | WASHER, lock, spring | 589 | 4 | 134 |
| C38302 | FITTING, nipple, cs, 1” NPT | 602 | 4 | 136 |
| 121980 | HEATER, pump, 725 watt | 611 | 2 | 137 |
| 15W706 | ENCLOSURE, pump, front | 625 | 1 | 137 |
| 16K094 | SWITCH, overtemp, horizontal | 613 | 1 | 137 |
| 25R658 | COVER, enclosure, pump, heat | 626 | 1 | 137 |
Source: Graco manual 3A8005J (Therm-O-Flow Warm Melt). Part numbers can change between revisions; this list reflects the revision LibertyCES has on file.
Related
Free spec review
Send James your spec
Fluid, concentration, temperature, flow or volume, and where it goes. James replies with a real answer, not a catalog page.
Reviewed by James Riggins, 30+ years specifying water and chemical process equipment · Updated