Cartridge / Pail Mini-Extruder (Dynamite) for General Industrial Assembly & MRO
30+ years spec experience. Send James the process data and get a real answer — not a catalog page.
Request a Spec Review →Yes. LibertyCES has documented Cartridge / Pail Mini-Extruder (Dynamite) in General Industrial Assembly & MRO applications. The right model depends on the fluid, concentration, temperature, flow and duty cycle, so send James your process data for a free spec review before final selection.
Notes from the vendor documentation
Small, complete family — all 3 SKUs real. No market list published, hence light. NXT air motor powered, extrudes from a 300cc cartridge up to 1-gallon containers — the small-batch/MRO end of the supply-pump ladder below Check-Mate and Dura-Flo. Manuals 3B0431EN, 350423EN.
Products cited in this application
Real Specifications
| Spec | Value | Source document |
|---|---|---|
| DM-22 Mini-Extruder | 1-gallon pails, Part# 2007873 | Graco — Sealants & Adhesives |
| Supply Pump cartridge size | 600cc cartridges, Part# 25T472 | Graco — Sealants & Adhesives |
| Extrusion range | Extrudes from a 300cc cartridge up to 1-gallon containers | Graco — Sealants & Adhesives |
| Drive | NXT air motor powered | Graco — Sealants & Adhesives |
DynaMite's real niche is the small-batch/MRO end of the supply-pump ladder — a 300cc cartridge up to a 1-gallon pail is deliberately below Check-Mate and Dura-Flo's drum-scale range. Specifying a drum-fed system for cartridge-scale MRO touch-up work is over-engineering a job that doesn't need it.
Every claim on this page traces to real, vendor-published documentation on file with LibertyCES. Confirm current specifications with the manufacturer before final specification.
FAQ
How is Cartridge / Pail Mini-Extruder (Dynamite) used in General Industrial Assembly & MRO?
Small, complete family — all 3 SKUs real. No market list published, hence light. NXT air motor powered, extrudes from a 300cc cartridge up to 1-gallon containers — the small-batch/MRO end of the supply-pump ladder below Check-Mate and Dura-Flo. Manuals 3B0431EN, 350423EN.
Which Cartridge / Pail Mini-Extruder (Dynamite) models are specified for General Industrial Assembly & MRO?
Documented models include Graco DynaMite DM-22 Mini-Extruder for 1-gallon pails, Part# 2007873, DynaMite Supply Pump for 600cc cartridges, Part# 25T472, DynaMite 190 single-component mini-extruder, 1 quart-1 gallon, Part# 235871. Confirm current specifications with the manufacturer before final selection.
What does LibertyCES need to size Cartridge / Pail Mini-Extruder (Dynamite) for a General Industrial Assembly & MRO application?
The fluid and its concentration, operating temperature, flow or volume, pressure and suction conditions, duty cycle, and the existing equipment it replaces or connects to. James reviews it for free.
Ready to buy or need a fast answer? Call, text, or email James directly — (559) 395-5500 · [email protected].
Send James your spec
Fluid, concentration, temperature, flow or volume, and where it goes. James replies with a real answer, not a catalog page.
Reviewed by James Riggins, 30+ years specifying water and chemical process equipment · Updated