Metering/Dispensing System — Oxidizers/Disinfectants
30+ years spec experience. Send James the process data and get a real answer — not a catalog page.
Request a Spec Review →Named chemicals
LibertyCES has documented Metering/Dispensing System in Oxidizers/Disinfectants service, including Sodium Hypochlorite, Chlorine Dioxide and Hydrogen Peroxide. Wetted materials to confirm: PVDF, PP and 316SS. Documented models include AXEON XP-Series chemical injection and ProMinent DULCODOS systems. Compatibility depends on exact concentration, temperature and duty cycle, so confirm with a free spec review.
Notes from the vendor documentation
XP-Series vendor reference table maps disinfection chemicals directly to system selection; Snyder dedicates a named resin SKU for sodium hypochlorite feed stations.
Materials documented for this service
- PVDF
- PP
- 316SS
Products cited for this service
Real Specifications
| Spec | Value | Source document |
|---|---|---|
| AXEON XP-Series output range | 4–30 GPD, 20:1 turndown ratio, peristaltic metering pump | AXEON Water Technologies — Filtration, Ion Exchange, Disinfection & Injection Systems |
| AXEON XP-Series duty rating | 1/6 HP, 110VAC/60Hz (220VAC/50-60Hz available), max 104°F/40°C, 28 lbs | AXEON Water Technologies — Filtration, Ion Exchange, Disinfection & Injection Systems |
| ProMinent Bello Zon CDKd (ClO2) capacity | 7.5–12,000 g/h, treats up to 60,000 m³/h — largest single disinfection product in the catalog | ProMinent — Water Treatment and Disinfection Systems |
| ProMinent CHLORINSITU III electrolysis output | 100–10,000 g/h chlorine, on-site ultra-pure/low-chlorate hypochlorite generation | ProMinent — Water Treatment and Disinfection Systems |
| Snyder sodium hypochlorite resin | Dedicated opaque white UV block-out resin #880059, tanks up to 12,500 gal | Snyder Industries — Industrial Tanks & Fittings |
| Snyder Chemical Feed Station size range | 35–440 gal pre-assembled primary tank + HDLPE containment basin | Snyder Industries — Industrial Tanks & Fittings |
AXEON's XP-Series uses peristaltic pump technology specifically for extended tube life — on continuous disinfectant dosing duty, the peristaltic tube (not the pump body) is the wear item to schedule replacement around.
Matching disinfectant dosing hardware to system scale matters as much as matching the chemical: AXEON's XP-Series tops out at 30 GPD for well-water and light commercial duty, while ProMinent's Bello Zon CDKd treats up to 60,000 m³/h — quoting the wrong end of that range either starves a municipal system or grossly oversizes a small commercial injection point.
Every material and product claim on this page traces to real, vendor-published documentation on file with LibertyCES. Chemical compatibility depends on exact concentration, temperature, and duty cycle — confirm current specifications with the manufacturer and request a spec review before final specification.
FAQ
Can Metering/Dispensing System handle Oxidizers/Disinfectants?
XP-Series vendor reference table maps disinfection chemicals directly to system selection; Snyder dedicates a named resin SKU for sodium hypochlorite feed stations.
What wetted materials should Metering/Dispensing System use in Oxidizers/Disinfectants service?
Materials documented for this service: PVDF, PP, 316SS. Compatibility depends on exact concentration, temperature and duty cycle, so confirm with a spec review before final specification.
Which Oxidizers/Disinfectants chemicals does this cover?
Named chemicals in this documentation: Sodium Hypochlorite, Chlorine Dioxide, Hydrogen Peroxide, Peracetic Acid, Ozone.
Which Metering/Dispensing System models are documented for Oxidizers/Disinfectants?
Documented examples include AXEON XP-Series chemical injection, ProMinent DULCODOS systems, Snyder Chemical Feed Stations (resin #880059).
Ready to buy or need a fast answer? Call, text, or email James directly — (559) 395-5500 · [email protected].
Send James your spec
Fluid, concentration, temperature, flow or volume, and where it goes. James replies with a real answer, not a catalog page.
Reviewed by James Riggins, 30+ years specifying water and chemical process equipment · Updated