Products / Sensing & Control

Clamp-On Ultrasonic Flow Meter

Direct answer

Chemical compatibility is documented for Hydrocarbons/Fuels/Oils. Documented models include GF Signet U1000 fixed clamp-on, GF Signet U3000-U4000 fixed clamp-on and Icon UltraFlo 500 clamp-on. Send James the fluid, concentration, temperature and flow for a free spec review.

30+ years spec experience. Send James the process data and get a real answer — not a catalog page.

Request a Spec Review →

0 sector applications

Where LibertyCES specs Clamp-On Ultrasonic Flow Meter

No documented sector-specific application yet for this category — treat as a spec-review item until real field data exists.

1 chemical compatibility record

Chemical compatibility

Hydrocarbons/Fuels/Oils

Manufacturer-documented

gasolinediesel fuelkerosenecrude oillubricating oilmineral oilFreon refrigerants

Materials: Non-wetted (clamp-on) — no material compatibility question at all · PFA Teflon (UltraFlo 1000 in-line) · Excluded by physics: magmeters require minimum conductivity 20 µS/cm (GF Signet 2551 and 2552), which hydrocarbons do not meet · GF Signet 2000 in-line micro flow rotor explicitly 'not recommended for strong oxidizers'

GF Signet 220/330 portable clamp-on ultrasonic (0.1-20 m/s, 135°C/275°F; works on PVDF-SYGEF, PP-PROGEF, PE-ELGEF, PB-INSTAFLEX, ABS, PVC-U/PVC-C, mild steel, ductile iron, SS316 and copper pipe) · GF Signet U1000 fixed clamp-on (0.1-20 m/s, 85°C/185°F) · GF Signet U3000-U4000 fixed clamp-on (0.1-20 m/s, 135°C/275°F, flagged suitable for high purity) · Icon UltraFlo 500 clamp-on (Teflon epoxy-coated aluminum, ±2%, 1/2"-10", 14-122°F) · Icon UltraFlo 1000 in-line (PFA Teflon, ±1%, 3/8"-1", 100 psi, -40 to 248°F, no dead volume flared tube connections)

Related Guides

Technical guides for Clamp-On Ultrasonic Flow Meter

Precision Level & Flow Controls — 80-GHz Radar, Ultrasonic & Pump Protection →Chemical Dosing Systems for Semiconductor Fab Facilities →

FAQ

Frequently Asked Questions

Can Clamp-On Ultrasonic Flow Meter handle Hydrocarbons/Fuels/Oils?

Clamp-On Ultrasonic Flow Meter has documented compatibility with Hydrocarbons/Fuels/Oils Materials to confirm: Non-wetted (clamp-on) — no material compatibility question at all, PFA Teflon (UltraFlo 1000 in-line), Excluded by physics: magmeters require minimum conductivity 20 µS/cm (GF Signet 2551 and 2552), which hydrocarbons do not meet, GF Signet 2000 in-line micro flow rotor explicitly 'not recommended for strong oxidizers'. Specific chemicals include gasoline, diesel fuel, kerosene, crude oil, lubricating oil, mineral oil, Freon refrigerants.

How do I specify Clamp-On Ultrasonic Flow Meter for my application?

Send LibertyCES your fluid, chemistry, concentration, temperature, flow, pressure, and suction conditions for a free spec review of Clamp-On Ultrasonic Flow Meter against your actual process data — not a generic catalog match.

Spec Review

Send LibertyCES the process data, not a part number

Fluid, chemistry, concentration, temperature, flow, pressure, line size, and current equipment — that's what a real spec review needs to start.

Request a spec review →Get the Sensing Guide

Ready to buy or need a fast answer? Call, text, or email James directly — (559) 395-5500 · [email protected].

Free spec review

Send James your spec

Fluid, concentration, temperature, flow or volume, and where it goes. James replies with a real answer, not a catalog page.

Reviewed by James Riggins, 30+ years specifying water and chemical process equipment · Updated October 13, 2026