Premium Filtration that Looks Like Magic
Silt and sand out. Uptime in. The CPH-16 delivers high-efficiency solids separation with whisper-low pressure loss — protecting heat exchangers, emitters, and membranes while cutting energy waste. Think of it as the kidney of your system, tuned for performance.
Right-sizes body & purge to actual particle load, integrates with pump curves/NPSH, and balances micron capture vs. headloss for the best lifetime cost. Projects led by seasoned specifiers like James hit targets on day one — no trial-and-error.
Lifetime Advantage • Proven ROI in Motion
Over a decade of operation, the CPH-16 delivers precision efficiency — lower energy use, zero consumables, and dramatically reduced maintenance. When engineering meets economics, the results speak in numbers.
💧 CPH-16 Separator
- 94 % @ 15 µm • 66 % @ 5 µm • 30 % @ 1 µm
- 1 – 3 psi ΔP → 3 – 5 % pump-energy savings
- No bags, cartridges, or media to replace
- Automated purge → near-zero downtime
- Built for seawater / industrial fluids — no exotic alloys
🧱 Media / Bag Filters
- 20 – 25 µm nominal capture (40 – 50 % @ 10 µm)
- 5 – 12 psi ΔP → higher horsepower demand
- Frequent bag & media change-outs
- Manual backwash → water loss + labor
- Requires coatings / exotic metals for compatibility
🏆 Key Wins
- 2 – 4× finer particle capture (single pass)
- 15 – 30 % lower lifetime CAPEX / OPEX
- 80 – 90 % less labor + downtime
- 3 – 5 % annual pump kWh savings
- Qualifies for energy-efficiency rebates
The James Factor
Behind every optimized system is a mind that understands both water and engineering. James Riggins has spent decades specifying, building, and troubleshooting chemical-feed and filtration systems across California. When he specs a separator, it isn’t theory — it’s decades of field data, pressure-drop analysis, and the experience of systems that run cleaner and longer.
What You Get with James’s Specification
- True right-sizing — CPH-16 bodies matched precisely to your flow and solids load, eliminating under/over-design.
- Integrated hydraulics — Pump curves, NPSH, and purge systems tuned to your plant’s real operating envelope.
- ROI-based engineering — Every decision balances micron capture with headloss for lifetime cost-of-ownership gains.
- Retrofit precision — Drop-in replacements that cut downtime and piping work to near zero.
- Expert supply chain — Direct coordination with Epiphene / Liberty for verified materials and startup guidance.
Contact James Riggins directly — your project will never guess again.